DatasheetsPDF.com

IAQS80F Dataheets PDF



Part Number IAQS80F
Manufacturers IDTech
Logo IDTech
Description 21.3 QSXGA Monochrome TFT/LCD
Datasheet IAQS80F DatasheetIAQS80F Datasheet (PDF)

Engineering Specification Engineering Specification Type 21.3 QSXGA Monochrome TFT/LCD Module Model Name:IAQS80F Document Control Number : OEM I-980F-01 Note:Specification is subject to change without notice. Consequently it is better to contact to International Display Technology before proceeding with the design of your product incorporating this module. Sales Support International Display Technology (C) Copyright International Display Technology 2002 All Rights reserved. October 8,2002 OE.

  IAQS80F   IAQS80F



Document
Engineering Specification Engineering Specification Type 21.3 QSXGA Monochrome TFT/LCD Module Model Name:IAQS80F Document Control Number : OEM I-980F-01 Note:Specification is subject to change without notice. Consequently it is better to contact to International Display Technology before proceeding with the design of your product incorporating this module. Sales Support International Display Technology (C) Copyright International Display Technology 2002 All Rights reserved. October 8,2002 OEM I-980F-01 1/33 Engineering Specification i Contents i Contents ii Record of Revision 1.0 Handling Precautions 2.0 General Description 2.1 Characteristics 2.2 Functional Block Diagram 3.0 Absolute Maximum Ratings 4.0 Optical Characteristics 5.0 Physical Interface 5.1 Signal Connectors 5.2 Back Light Connector 5.3 Interface Signal Description 5.4 Interface Signal Electrical Characteristics 5.4.1 Signal Electrical Characteristics for LVDS Receiver 5.4.2 Back Light Control Signal Electrical Characteristics 5.4.3 Recommended Guidelines for Motherboard PCB Design and Cable Selection 6.0 Pixel format image 7.0 Interface Timings 7.1 Timing Characteristics 8.0 Power Consumption 9.0 Power ON/OFF Sequence 10.0 Mechanical Characteristics 11.0 National Test Lab Requirement (C) Copyright International Display Technology 2002 All Rights reserved. October 8,2002 OEM I-980F-01 2/33 Engineering Specification ii Record of Revision Date October 8,2002 Document Revision OEM I-980F-01 Page All Summary First Edition for customer. Based on Internal Spec. as of August 14,2002. (C) Copyright International Display Technology 2002 All Rights reserved. October 8,2002 OEM I-980F-01 3/33 Engineering Specification 1.0 Handling Precautions • If any signal or power line deviates from the power on/off sequence, it may cause shortening the life of the LCD module and/or damage the electrical components. Also, hot plug-in operation may cause the similar damages as above. • The LCD panel and the CCFL (Cold Cathode Fluorescent Lamp)s are made of glass and may break or crack if dropped on a hard surface. Handling with care is necessary. • The fluorescent lamp in the liquid crystal display (LCD) contains mercury. Do not put it in trash that is disposed of in landfills. Dispose of it as required by local ordinances or regulations. • Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be applied to exemption conditions of the flammability requirements (4.4.3.3, EN60950 or UL1950) in an end product. • Please handle with care when mounted in the system cover. Mechanical damage for the lamp cable / lamp connector may cause safety problems. • After installation of the TFT Module into an enclosure (Monitor frame, for example), do not twist nor bent the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/ twisting forces are applied to the TFT Module from out side. Otherwise the TFT Module may be damaged. • Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. • Also, when removing a protection sheet from the module surface, please take some actions against static electricity, like earth band, ionic shower, etc. • Since front polarizer is easily damaged, pay attention not to scratch it. • Wipe off water drop immediately. Long contact with water may cause discoloration or spots. • When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. • Do not open nor modify the Module Assembly. • Prevent continuous 10 hours or over same pattern displaying, to avoid image sticking. O The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by International Display Technology for any infringements of patents or other right of the third partied which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of International Display Technology or others. The information contained herein may be changed without prior notice. It is therefore advisable to contact International Display Technology before proceeding with the design of equipment incorporationg this product. O (C) Copyright International Display Technology 2002 All Rights reserved. October 8,2002 OEM I-980F-01 4/33 Engineering Specification 2.0 General Description This specification applies to the Type 21.3 Monochrome TFT/LCD Module 'IAQS80F'. This module is designed for a module with neutral white (0.294, 0.309) and DICOM gamma curve. The screen format and electrical interface are intended to support the QSXGA (2560(H) x 2048(V)) screen with sensor area (176(H) x 16(V)) at the top of the screen. Supported gray scales are native 8bit level (8-bit per Tri-subpixels data driver). All input signals are LVDS (Low Voltage Differential Signaling) interface compatible. This module contains an inverter card fo.


nl204153bm21-01 IAQS80F IAQS80


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)