DatasheetsPDF.com

IAUX61F Dataheets PDF



Part Number IAUX61F
Manufacturers IDTech
Logo IDTech
Description UXGA Monochrome TFT/LCD
Datasheet IAUX61F DatasheetIAUX61F Datasheet (PDF)

Engineering Specification Engineering Specification Type 19.6 UXGA Monochrome TFT/LCD Module Model Name: IAUX61F Document Control Number: OEM I-961F-02 Note: Specification is subject to change without notice. Consequently it is better to contact International Display Technology before proceeding with the design of your product incorporating this module. Sales Support International Display Technology (C) Copyright International Display Technology 2002 All Rights reserved July 2,2003 OEM I-96.

  IAUX61F   IAUX61F


Document
Engineering Specification Engineering Specification Type 19.6 UXGA Monochrome TFT/LCD Module Model Name: IAUX61F Document Control Number: OEM I-961F-02 Note: Specification is subject to change without notice. Consequently it is better to contact International Display Technology before proceeding with the design of your product incorporating this module. Sales Support International Display Technology (C) Copyright International Display Technology 2002 All Rights reserved July 2,2003 OEM I-961F-02 1/33 Engineering Specification i Contents i Contents ii Record of Revision 1.0 Handling Precautions 2.0 General Description 2.1 Characteristics 2.2 Functional Block Diagram 3.0 Absolute Maximum Ratings 4.0 Optical Characteristics 5.0 Signal Interface 5.1 Connectors 5.2 Interface Signal Connector 5.3 Interface Signal Description 5.4 Interface Signal Electrical Characteristics 5.4.1 LVDS Receiver Circuit 5.4.2 Recommended Guidelines for Motherboard PCB Design and Cable Selection 6.0 Pixel Format Image 7.0 Video Timings 7.1 Timing Characteristics 8.0 Power Consumption 9.0 Power ON/OFF Sequence 10.0 Mechanical Characteristics 11.0 National Test Lab Requirement 12.0 Application Note 12.1 Design Recommendation 12.1.1 Recommendation for cooling 12.1.2 Mechanical Recommendation for monitor enclosure design 12.1.3 Recommendation of designing monitor which users IAUX61F for EMC compliance 12.2 Design Reference Data 12.2.1 Backlight Dimming Range vs VDIM voltage (C) Copyright International Display Technology 2002 All Rights reserved July 2,2003 OEM I-961F-02 2/33 Engineering Specification ii Record of Revision Document Revision OEM I-961F-01 OEM I-961F-02 Page All 5 6 9 11 13 16 17 25 26 27 28 30 33 Summary First Edition for customer. Based on Internal Spec. as of January 16,2003. To Update Characteristics table. To Add the atmospheric pressure. To Update Minimum White Luminance. To Update I/F Connector-2 Signal Pin Assignment (J2) Pin20 (N.C.) is changed to SELLVDS. To Update Signal Description for J1,J2 and CN1 The explanation of SELLVDS is added. To Update LVDS Receiver AC Characteristics To Update LVDS Format. To Update Timing Characteristics. To Update Power Consumption. To Update Power Sequence To Update Reference Drawings. To Add Application Note chapter To Add Design Reference Data. Date March 19,2003 July 2,2003 (C) Copyright International Display Technology 2002 All Rights reserved July 2,2003 OEM I-961F-02 3/33 Engineering Specification 1.0 Handling Precautions • • • • • • • • • • • • • If any signal or power line deviates from the power on/off sequence, it may cause shortening the life of the LCD module and/or damage the electrical components. Also , hot plug-in operation may cause the similar damages as above. The LCD panel and CCFL (Cold Cathode Fluorescent Lamp)s are made of glass and may break or crack if dropped on a hand surface. Handling with care is necessary. The fluorescent lamp in the liquid crystal display (LCD) contains mercury. Do not put it in trash that is disposed of in landfills. Dispose of it as required by local ordinances or regulations. Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be applied to exemption conditions of the flammability requirements (4.4.3.3, EN60950 or UL1950) in an end product. Please handle with care when mounted in the system cover. Mechanical damage for the lamp cable/ lamp connector may cause safety problems. After installation of the TFT Module into an enclosure (Monitor frame ,for example), do not twist nor bent the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/ twisting forces are applied to the TFT Module from out side. Otherwise the TFT Module may be damaged. Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. Also, when removing a protection sheet from the module surface, please take some actions against static electricity, like earth band, ionic shower , etc. Since front polarizer is easily damaged, pay attention not to scratch it. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. Do not open nor modify the Module Assembly. Prevent continuous 10 hours or over same pattern displaying, to avoid image sticking. O O The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by International Display Technology for any infringements of patents or other right of the third partied which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of International Display Technology or others. The information contained herein may be changed without prior notice. It is therefore advisable to contact International Display Technology be.


IAUX61 IAUX61F T200XW01


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)