MX25L512C

MX25L512C MX25L512C DATASHEET P/N: PM1469 1 REV. 1.2, OCT. 06, 2009 MX25L512C 512K-BIT [x 1] CMOS SERIAL FLASH FEATURES GENERAL Serial Peripheral Interface compatible -- Mode 0 and Mode 3 524,288 x 1 bit structure 16 Equal Sectors with 4K byte each - Any Sector can be erased individually Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations Latch-up protected to 100mA from -1V to Vcc +1V PERFORMANCE High Performance - Fast access time: 85MHz serial clock - Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page) - Fast erase time: 60ms(typ.)/sector (4K-byte per sector) ; 1s(typ.) and 2s(max.)/chip Low Power Consumption - Low active read current: 12mA(max.) at 85MHz and 4mA(max.) at 33MHz - Low active programming current: 15mA (max.) - Low active erase current: 15mA (max.) - Low standby current: 10uA (max.) - Deep power-down mode 1uA (typical) Minimum 100,000 erase/program cycles 20 years data retention SOFTWARE FEATURES Input Data Format - 1-byte Command code Block Lock protection - The BP0~BP1 status bit defines the size of the area to be software protected against Program and Erase instructions. Auto Erase and Auto Program Algorithm program pulse widths (Any page to be programed should have page in the erased state first) Status Register Feature Electronic Identification - RES command, 1-byte Device ID HARDWARE FEATURES SCLK Input - Automatically erases and veri...