MX25V4005C

MX25V4005C 4M-BIT [x 1] 2.5V CMOS SERIAL FLASH FEATURES GENERAL Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3 4,194,304 x 1 bit structure 128 Equal Sectors with 4K byte each - Any Sector can be erased individually 8 Equal Blocks with 64K byte each - Any Block can be erased individually Single Power Supply Operation - 2.35 to 3.6 volt for read, erase, and program operations Latch-up protected to 100mA from -1V to Vcc +1V PERFORMANCE High Performance - Fast access time: 50MHz serial clock - Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page) - Fast erase time: 60ms(typ.)/sector (4K-byte per sector) ; 1s(typ.) and 2s(max.)/block (64K-byte per block) Low Power Consumption - Low active read current: 8mA(max.) at 50MHz and 4mA(max.) at 25MHz - Low active programming current: 15mA (max.) - Low active erase current: 15mA (max.) - Low standby current: 10uA (max.) - Deep power-down mode 1uA (typical) Minimum 100,000 erase/program cycles 20 years data retention SOFTWARE FEATURES Input Data Format - 1-byte Command code Block Lock protection - The BP0~BP2 status bit defines the size of the area to be software protected against Program and Erase instructions Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector - Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed ...