Primary-Side Regulation PWM Power Switch
Page No. : 1/9
RS2111/RS2112
Primary-Side Regulation PWM Power Switch
Description
RS2111/RS2112 is an offline PWM Powe...
Description
Page No. : 1/9
RS2111/RS2112
Primary-Side Regulation PWM Power Switch
Description
RS2111/RS2112 is an offline PWM Power switch for low power AC/DC charger and adaptor applications. It operates in primary-side sensing and regulation. Consequently, opto-coupler and TL431 could be eliminated from design. Proprietary Constant Voltage (CV) and Constant Current (CC) control is integrated as shown in the figure below.
V0
8-Lead Plastic DIP-8 Package Code: P
8-Lead Plastic SOP-8 Package Code: S
I0
Fig1. Typical CC/CV Curve In CC control, the current and output power setting can be adjusted externally by the sense resistor Rs at CS pin. In CV control, multi-mode operations are utilized to achieve high performance and high efficiency. Device operates in fixed frequency mode at large load conditions, frequency reduction mode at light/medium load and ‘Extended burst mode’ at No/light load conditions. RS2111/RS2112 offers power on soft start control and complete protection coverage with auto-recovery features including Cycle-by-Cycle current limiting, VDD over-voltage clamp and UVLO, fail-safe protection for open loop fault condition. Excellent EMI performance is achieved with Orister proprietary frequency Jiggling technique together with soft switching control at the totem pole gate drive output with No-Y Cap design.
Features
Primary-side Sensing and Regulation With No 431 and Opto-coupler Multi-mode operation for High Efficiency Programmable CV and CC Regulation Adjusta...
Similar Datasheet