Data Sheet
Triple 1800 mA Buck Regulator with Precision Enables and Power-Good Outputs
ADP5135
12604-001
FEATURES
Inp...
Data Sheet
Triple 1800 mA Buck
Regulator with Precision Enables and Power-Good Outputs
ADP5135
12604-001
FEATURES
Input voltage range: 3.0 V to 5.5 V Three 1800 mA buck
regulators 24-lead, 4 mm × 4 mm LFCSP package
Regulator accuracy: ±1.8% Factory programmable or external adjustable VOUTx pins Precision enables for easier power sequencing Power-good pins for monitoring each
regulator 3 MHz buck operation with forced PWM and auto PWM/PSM
modes BUCK1/BUCK2/BUCK3: output voltage range from 0.8 V to 3.8 V
APPLICATIONS
Power for processors, application specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and radio frequency (RF) chipsets
Portable instrumentation and medical devices Space constrained devices
GENERAL DESCRIPTION
The ADP5135 combines three high performance buck
regulators (BUCK1, BUCK2, and BUCK3). It is available in a 24-lead, 4 mm × 4 mm LFCSP. The high switching frequency of the buck
regulators enables tiny multilayer external components and minimizes the board space. When the MODE pin is set to high, the buck
regulators operate in forced pulse-width modulation (PWM) mode. When the MODE pin is set to low, the buck
regulators operate in PWM mode only when the load is above a predefined threshold. When the load current falls below this predefined threshold, the
regulator operates in power save mode (PSM), improving the light load efficiency. BUCK1 and BUCK2 operate in synchronization, and BUCK3 operates out of phase to reduce the input c...