HC4P5524-9

HC-5524 Data Sheet February 1999 File Number 2798.6 EIA/ITU 24V PABX SLIC with 25mA Loop Feed The HC-5524 telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a 24V interface between the traditional telephone subscriber pair (Tip and Ring) and the low voltage filtering and coding/decoding functions of the line card. Together with a secondary protection diode bridge, the device will withstand 500V induced surges, in plastic packages. The SLIC also maintains specified transmission performance in the presence of externally induced longitudinal currents. The BORSCHT functions that the SLIC provides are: Battery Feed with Subscriber Loop Current Limiting Overvoltage Protection Ring Relay Driver Supervisory Signaling Functions Hybrid Functions (with External Op-Amp) Test (or Battery Reversal) Relay Driver In addition, the SLIC provides selective denial of power to subscriber loops, a programmable subscriber loop current limit from 20mA to 60mA, a thermal shutdown with an alarm output and line fault protection. Switch hook detection, ring trip detection and ground key detection functions are also incorporated in the SLIC device. The HC-5524 SLIC is ideally suited for line card designs in PBX and DLC systems, replacing traditional transformer solutions. Features DI Monolithic High Voltage Process Compatible with Worldwide PBX...