LCD
AMP DISPLAY INC.
SPECIFICATIONS
CUSTOMER CUSTOMER PART NO. AMP PART NO APPROVED BY DATE
Approved For Specifications ...
Description
AMP DISPLAY INC.
SPECIFICATIONS
CUSTOMER CUSTOMER PART NO. AMP PART NO APPROVED BY DATE
Approved For Specifications Approved For Specifications & Sample
AM-480272H2TMQW-A0H)
9856 SIXTH STREET RANCHO CUCAMONGA CA TEL: 909-980-13410 FAX: 909-980-1419 WWW.AMPDISPLAY.COM
AMP DISPLAY INC
91730
APPROVED BY
CHECKED BY
ORGANIZED BY
Date: 2010/07/27
1
RECORD
Revision Date Page 2010/8/27 2012/4/23 4
OF
REVISION
Contents Editor Patrick Leo
New Release Remove the Power Voltage
Date: 2010/8/27
2
1. FEATURES
(1) (2) (3) (4) (5) (6) (7) Construction : a-Si TFT-LCD with driving system, White LED Backlight. LCD type : Transmissive , Normally White Number of the Colors : 16.7M colors (R,G,B 8 bit digital each) RGB Interface 40 pin. LCD Power Supply Voltage : 3.3V single power input Interface mode: TTL RGB interface. Sync mode. Reflective ratio 0.5% ~ 2%
The timing control IC both supports DE mode and Sync mode timing. The module default is Sync mode. Mode Hardware PIN32: PIN33: PIN37: Remark Setting HSYNC VSYNC NC(DE) Sync Mode R8 NC HSYNC VSYNC NC Default needed needed DE pull low internally. DE mode R8= 0 ohm HSYNC VSYNC DE Option don’t don’t needed In DE mode, only DE signal is needed needed needed. HSYNC and VSYNC pull High internally.
It is necessary to keep tvp+tvb=12 and thp+thb=43 in SYNC mode. DE mode is unnecessary.
If you need the DE mode for mass production, please contact us to apply a part number for this option. (R8= 0 ohm).
Date: 2010/8/27
3
2. PHYSIC...
Similar Datasheet
- AM-480272H2TMQW-A0H-F LCD - AMP DISPLAY