Document
A MP I R E
SPECIFICATIONS FOR LCD MODULE
CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. APPROVED DATE
■ Preliminary Specification
AM- 800480FTMQW-00H
BY
Approved Specification
APPROVED BY
CHECKED BY
ORGANIZED BY
Date : 2007/6/4
AMPIRE CO., LTD.
1
RECORD
Revision Date Page 2007/6/4 -
OF
REVISION
Contents Editor Edward
New Release
Date : 2007/6/4
AMPIRE CO., LTD.
2
1. Features
10.2 inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) module. This module is composed of a 10.2” TFT-LCD panel and backlight unit. (1) Construction: 10.2” a-Si color TFT-LCD, White LED Backlight . (2) Resolution (pixel): 800(R.G.B) X480 (3) Number of the Colors : 262K colors ( R , G , B 6 bit digital each) (4) LCD type : Transmissive Color TFT LCD ( normally White) (5) Interface: 60 pin (6) Power Supply Voltage: 3.3V single power input. Viewing Direction: 6 O’clock ( The direction it’s hard to be discolored )
2. PHYSICAL SPECIFICATIONS
Item LCD size Resolution Dot pitch Active area Module size Surface treatment Color arrangement interface Backlight power consumption Panel power consumption Weight Specifications 10.2 inch (Diagonal) 800 x 3(RGB) x 480 0.0925(W) x 0.276(H) 222.0(W) x 132.48(H) 235.0(W) x 145.8(H) x 6.1(D) Anti-Glare RGB-stripe Digital 2.57 (Typ.) 250 (Typ.) 335.2 W mW g dot mm mm mm unit
Date : 2007/6/4
AMPIRE CO., LTD.
3
3. ABSOLUTE MAX. RATINGS
(GND = AVSS = 0V, Note 2) Item Symbol Min. VCC AVDD Power voltage VGH VGL VGH-VGL Input signal voltage Operation temperature Storage temperature V1~V7 V8~V14 TOP TST -0.3 -0.5 -0.3 -15 -0.4AVDD -0.3 -30 -30 Values Max. 5 12 18 0.3 33 AVDD-0.1 0.6AVDD 85 85 V V ℃ ℃ Note 1 V UNIT Note
Note 1: AVDD – 0.1≧V1≧V2≧V3≧V4≧V5≧V6≧V7≧V8≧V9≧V10≧V11≧V12 ≧V13≧V14≧AVSS + 0.1 Note 2: The absolute maximum rating values of the module should not be exceeded. Once exceeded absolute maximum rating values, the characteristics of the module may not be recovered. Even in an extreme condition, may result in module permanently destroyed.
Date : 2007/6/4
AMPIRE CO., LTD.
4
4. ELECTRICAL CHARACTERISTICS
4-1 Typical Operation Conditions (GND = AVSS = 0V, Note 1) Values Item Symbol Min. VCC AVDD Power voltage VGH VGL VCOM Input signal voltage V1~V7 V8~V14 Input logic high voltage Input logic low voltage VIH VIL 14.3 -10.5 3.5 0.4 AVDD 0.1 0.7VCC 0 15 -10 3.7 ----15.7 -9.5 3.9 AVDD-0.1 0.6 AVDD VCC 0.3 VCC V V V (V1+V14)/ 2=4.5V 3.0 9.0 Typ. 3.3 9.2 Max. 3.6 9.4 V UNIT Note
Note 1 : Be sure to apply GND, VCC, and VGL, to the LCD first, and then apply VGH. 4-2 Current Consumption (GND = AVSS = 0V) Values Item Symbol Min. IGH IGL Current for Driver ICC IDD --4 25 10 50 mA mA VCC = 3.3V AVDD = 9.2V --Typ. 0.3 0.2 Max. 0.5 1.0 mA mA VGH = 15V VGL = -10V Unit Note
Date : 2007/6/4
AMPIRE CO., LTD.
5
4-3 Backlight Driving Conditions Values Item LED voltage LED current LED life time Symbol Min. VL IL ---20,000 Typ. 9.9 20 -Max. 10.5 --V mA Hr Note 2 Note 2、3 Note1 Unit Note
Note 1 : The “LED life time” is d.