DatasheetsPDF.com

NOIL1SM0300A Dataheets PDF



Part Number NOIL1SM0300A
Manufacturers ON Semiconductor
Logo ON Semiconductor
Description LUPA300 CMOS Image Sensor
Datasheet NOIL1SM0300A DatasheetNOIL1SM0300A Datasheet (PDF)

DATA SHEET www.onsemi.com LUPA300 CMOS Image Sensor NOIL1SM0300A Overview This document describes the interfacing and driving of the LUPA300 image sensor. The pixel size and resolution result in a 6.3 mm x 4.7 mm optical active area (1/2 inch). This VGA−resolution CMOS active pixel sensor features global shutter and a maximal frame rate of 250 fps in full resolution, where integration during readout is possible. The readout speed can be boosted by means of subsampling and windowed Region Of In.

  NOIL1SM0300A   NOIL1SM0300A


Document
DATA SHEET www.onsemi.com LUPA300 CMOS Image Sensor NOIL1SM0300A Overview This document describes the interfacing and driving of the LUPA300 image sensor. The pixel size and resolution result in a 6.3 mm x 4.7 mm optical active area (1/2 inch). This VGA−resolution CMOS active pixel sensor features global shutter and a maximal frame rate of 250 fps in full resolution, where integration during readout is possible. The readout speed can be boosted by means of subsampling and windowed Region Of Interest (ROI) readout. High dynamic range scenes can be captured using the double and multiple slope functionality. User programmable row and column start/stop positions allow windowing. subsampling reduces resolution while maintaining the constant field of view and an increased frame rate. The programmable gain and offset amplifier maps the signal swing to the ADC input range. A 10−bit ADC converts the analog data to a 10−bit digital word stream. The sensor uses a 3−wire Serial−Parallel (SPI) interface. It operates with a 3.3 V and 2.5 V power supply and requires only one master clock for operation up to 80 MHz pixel rate. It is housed in an 48−pin ceramic LCC package. The sensor is available in a monochrome version or Bayer (RGB) patterned color filter array. This data sheet allows the user to develop a camera−system based on the described timing and interfacing. Features  640(H) x 480(V) Active Pixels (VGA Resolution)  9.9 mm x 9.9 mm Square Pixels (Based on the High−Fill Factor Active Pixel Sensor Technology of FillFactory (US patent No. 6,225,670 and others)).  Optical Format: 1/2 Optical Inch  Pixel Rate of 80 MHz  Frame Rate: 250 fps at Full Resolution  On−Chip 10 bit ADCs  Global Shutter  Subsampling (Y Direction)  Serial Pheripheral Interface (SPI)  Programmable Read Out Direction (X and Y)  Random Programmable Windowing Figure 1. LUPA300 Package Photo  Power Dissipation: 190 mW  48−pin LCC Package  These Devices are Pb−Free and are RoHS Compliant Applications  Machine Vision  Motion Tracking Table 1. ORDERING INFORMATION Marketing Part Number NOIL1SM0300A−QDC NOIL1SE0300A−QDC NOIL1SM0300A−WWC Description Mono with Glass Color micro lens with Glass Mono Wafer Sales Package 48 pin LCC Wafer Sales  Semiconductor Components Industries, LLC, 2014 1 January, 20223 − Rev. 13 Publication Order Number: NOIL1SM0300A/D NOIL1SM0300A SPECIFICATIONS Table 2. GENERAL SPECIFICATIONS Parameter Specifications Pixel Architecture 6 transistor pixel Pixel Size 9.9 mm x 9.9 mm Resolution 640 (H) x 480 (V) Subsampling subsampling is possible (only in the Y− direction) Sub−sampling pattern: Y0Y0Y0Y0 Windowing (ROI) Randomly programmable ROI read out. Implemented as scanning of lines/columns from an uploaded position Read out direction Read out direction can be reversed in X and Y Programmable gain Range x1 to x16, in 16 steps using 4−bits programming Programmable offset 256 steps (8 bit) Digital output On−chip 10−bit ADCs at 80 Msamples/s Power dissipation 160 mW not including output load 190 mW with output load of 15 pF Package type 48 pin LCC Mass 1 g Table 3. ELECTRO−OPTICAL SPECIFICATIONS Parameter Typical Specifications Optical Format ½ optical inch Shutter Type Pipelined Global shutter Frame Rate 250 fps FPN PRNU Conversion gain Saturation charge 2.5% RMSp−p (Min: 10%, Max: 3.1%) 2.5% RMS, Max: 3.1% 34 uV/e− at output 35.000 e− Sensitivity 3200 V.m2/W.s 17 V/lux.s (180 lux = 1 W/m2) Peak QE * FF Dark current (at 21C) Noise electrons 45% 300 mV/s 32e− S/N ratio 43 dB Parasitic sensitivity 1/5000 Dynamic Range 61 dB Extended dynamic range Multiple slope (up to 90 dB optical dynamic range) MTF 60% Table 4. RECOMMENDED OPERATING RATINGS (Notes 1 and 2) Symbol Parameter ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ TJ Operating temperature range Min Max Units −40 70 C Table 5. ABSOLUTE MAXIMUM RATINGS (Notes 2, 3 and 4) Symbol ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ VDD[5] ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ TS ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ %RH DC Supply Voltage Storage Temperature Humidity (Relative) Parameter Min Max Units −0.5 4.3 V −30 +85 C − 85% at 85C ESD[3] & LU[4] ESD & Latch−up (Notes 3 and 4) mA ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage ma.


NOII4SM6600A NOIL1SM0300A NOIL1SE0300A-QDC


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)