LED Driving Board
LITEMAX LID10A03
LED Driving Board
(1st Edition 7/25/2008 ) All information is subject to change without notice.
Approv...
Description
LITEMAX LID10A03
LED Driving Board
(1st Edition 7/25/2008 ) All information is subject to change without notice.
Approved by
Checked by
Prepared by
David
Ming
Eric
LITEMAX Electronics Inc. 8F-2, No.133, Lane 235, Bau-chiau Rd., Shin-dian City, Taipei County, Taiwan R.O.C. Tel : 886-2-8919-1858 Fax: 886-2-8919-1300 Homepage: http://www.litemax.com.tw
Page 1
General
The LID10A03 is designed to power High White LED Light Bar to a nominal power level of 8W (TYPICAL) Intensity control (0-100%) is accomplished by the user providing a variable dc level of 0.5V (full-on) to 4.8V (off) at pin7 of J1. Enable control is accomplished at pin8 of J1 (0V=on,5V=off)
Specifications:
z z z z z z z z Vin=+10V to +14V ±10% Constant current and voltage function. No load voltage=30V LED Light Bar output Voltage=22V(TYPICAL) LED Light Bar output current=360mA @100%(TYPICAL) Nominal LED Light Bar working frequency=125KHz ±5KHz Nominal PWM frequency=200Hz ±10% PWM duty cycle range=0 to 100% Average electrical efficiency>90%
z
Page 2
LED Application
This specification is applied to LED converter unit for SP1075 LED backlight
Operating Characteristics
Item Input Voltage Symbol Conditions Vin IinL IinH IoutL IoutH Freq Freq Vadj
VIN=12V,Vadj=5V
MIN. TYP. MAX. Unit Remark
10.0 0.0 12.0 14.0 ----710 ----356 125 200 ------------740 -----
V mA
Input Current (Low Brightness) Input Current (High Brightness)
VIN=12V,Vadj=0V VIN=12V,Vadj=5V
695 0.0 300 120 180
mA
LED Current
(Low Brightness...
Similar Datasheet