LED Backlight Power Control
LPS100A-6
LED Backlight Power Control
Product Description
The Optillis LPS100A series is a fixed frequency step-up DC/DC...
Description
LPS100A-6
LED Backlight Power Control
Product Description
The Optillis LPS100A series is a fixed frequency step-up DC/DC converter designed to drive up to 3 strings of LEDs from a 12V supply. This board was designed to work with the Optrex and Mitsubishi TFT-LCD display product line.
Features
Low Cost – Constant Current Led Backlight Driver Board Form Factor and Control Interface compatible to existing CCFL Driver Boards 3 / 4 wire operation 97% efficiency RoHs Extended Temperature Range Power on soft start
LCD Support
6.5” Optrex T-55465GD065J-LW-A-AAN 6.5” Optrex T-55465GD065J-LW-A-AAN 6.5” Optrex T-55629D065J-LW-A-AAN
Specifications
6 – 18 VDC input voltage -30 to 85 C operating temperature Weight 0.4 oz (10g) 0.800”W x 4.35”L x 0.4” H (1) SM06B-SHLS-TF LED connectors (1) 640457-4 Tyco power / control connector
Options
5V input voltage Custom form factor, connectors
Optillis 2011 Rev A
LPS100A-6
Electrical Characteristics (per string)
Input
PIN. ITEM SYMBOL MIN. TYP. MAX. UNIT Remarks LED Input Voltage VCC 1 6 12 18 Vdc Ground VEE 2 0 --V Vcontrol VCTL 3 0 -18 V *note 1 4 Enable (on/off) Enb 0 -18 V **note 2 * note 1 Brightness Control Input : 0 – 5.0 VDC (0 – 100%) ** note 2 Enable Input: 0.3V or less=OFF, 2V or greater=ON. Not Connected defaults ON.
Output
ITEM LED Voltage LED Current SYMBOL VF IF MIN. ----TYP. (17) MAX. 21.4 21.7 22.0 100 UNIT V V V mA Remarks 25C 0C -30C 25C
--
Mechanical Characteristics
J3 (Input) - Power / Control connector o PIN 1 2 3 ...
Similar Datasheet