LED-CONVERTER UNIT
PS-LD0301-039(S)
DESCRIPTION : This low profile LED converter is developed for max. 3 LED-lines Optimized for Optrex: T-55532D104J-LW-A-AAN T-55533D104J-LW-A-AAN APPLICABLE: 1~3 LED lines (Serial Mode) Pout max. 7W LED Voltage max. 38Vdc Lamp Current max. 120mAdc FEATURES : Internal open LED detection for every line Analog or ext. PWM dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Wide input voltage range RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Operating Temperature Range Storage Temperature Range Humidity -20°C ~ +50°C (only 5V) -20°C ~ +70°C (only 12V) -20°C ~ +85°C 95 %RH max (PRELIMINARY INFORMATION)
DIMENSIONS :
LxWxH
64 x 32 x 6.5 mm
Weight :8 (g) typ.
Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN3 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0890 / PBD 53261-0690 / PBD Note t=1.0mm Molex Molex
Power Systems – The Power Solution
Web: Email: www.Power-Systems.de
[email protected]
Page (1)
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800
Version 2.0.2, 16th May 2014
All specifications are subject to change without notice.
LED-CONVERTER UNIT
PS-LD0301-039(S)
Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 CN 1-7 CN 1-8 Symbols Ratings Vin 4.75 ~ 13.2 Vdc Vin 4.75 ~ 13.2 Vdc Vrmt 0 ~ 1.5 = OFF / 2.5 ~ Vin = ON Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH Vbr 0.0 ~ 5.0 (5V=low brightness) GND GND GND Pin No. CN 3-1 CN 3-2 CN 3-3 CN 3-4 CN 3-5 CN 3-6
(PRELIMINARY INFORMATION)
Output side CN3: Symbols RTN1(-) RTN2(-) N.C. N.C Vhigh(+) Vhigh(+) Ratings LED LINE 1 RETURN LED LINE 2 RETURN
38Vdc (120mArms) 38Vdc (120mArms)
ELECTRICAL CHARACTERISTICS :
Conditions Parameters Output Current Output Current Input Current Open Load Shutdown PWM Frequency Output Power Output Power Output Power Output Power Symbols Iout Imin Iin Vbias f(PWM) Pout Pout Pout Pout Vin (V) 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 4.75 ~ 13.2 Vbr (V) Tu (°C) 0 5 0 0 0 0 0 0 0 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 Specification Min. TBD TBD 150 TBD TBD TBD TBD Typ. 120 10 1.0 38 TBD TBD TBD TBD Max. TBD 1.87 300 TBD TBD TBD TBD Unit mAdc % Adc Vdc Hz Watt Watt Watt Watt Note
Dut y 100% , max current duty cycle *By 12Vdc
Tu: -20~+50degC Tu: -20~+70degC For one line For one line
Note 1 : Note 2 : Note 3 :
Do not use analog dimming and external PWM dimming at the same time. Pin Terminal Style converters are mounted with Molex connectors. External PWM-signal is LOW active.
Vin 4. 75 ~ 13.2 Vdc A Iin V CN1-2 Vrmt 1. 5 / 2. 5 Vdc V CN1-1 CN3-6 CN3-5
D1 D1
TEST CIRCUIT :
a b
SW1 CN1-3
CN3-4
N.C.
D2 D2
Ext. PWM 0. 0 ~ Vin
CN1-4 SW2
Dx Dx
c
Connect Vbr to Ground while using ext. PWM dimming.
Vbr 0. 0 ~ 5. 0 Vdc
CN1-5 SW3 CN1-6 CN1-7 CN1-8 CN3-3 CN3-2 CN3-1 N.C.
CABLES : For input: For output: 500 mm, stripped and tinned ends, order key < input cable # 13> For Optrex panel in the top: matching connectors, 200 mm, order key
Power Systems – The Power Solution
Web: Email: www.Power-Systems.de [email protected]
Page (2)
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800
Version 2.0.2, 16th May 2014
All specifications are subject to change without notice.
.