Document
KBU15005 THRU KBU1510
SINGLE-PHASE SILICON BRIDGE RECTIFIER
REVERSE VOLTAGE: FORWARD CURRENT:
FEATURES
· High surge current capability · Ideal for printed circuit board · Plastic material has Underwriters Laboratory Flammability Classification 94V-0 · Reliable low cost construction utilizing molded plastic technique KBU
50 to 1000 VOLTS 15.0 AMPERE
MECHANICAL DATA
Case: Molded plastic, KBU Epoxy: UL 94V-O rate flame retardant Terminals: Leads solderable per MIL-STD-202, method 208 guaranteed Mounting position: Any Weight: 0.3ounce, 8.0gram Dimensions in inchs and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%.
Symbols KBU15005 KBU1501 KBU1502 KBU1504 KBU1506 KBU1508 KBU1510 Maximum Recerrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at TA=55℃ Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 15A DC and 25℃ Maximum Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance (Note 2) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range at TA=25℃ TA=100℃ VF IFSM VRRM VRMS VDC I(AV) Units Volts Volts Volts Amp
50 35 50
100 70 100
200 140 200
400 280 400 15.0
600 420 600
800 560 800
1000 700 1000
300.0
Amp
1.1 10.0 500 18.0 3.0 -55 to +125
Volts
IR RθJA RθJC TJ,Tstg
uAmp ℃/W ℃/W ℃
NOTES:
1- Units mounted in free air, no heatsink, P.C.B. at 0.375" (9.5mm) lead length with 0.5 x 0.5” (12 x 12mm) copper pads 2- Units mounted on a 3.0 x 3.0” x 0.11" thick (7.5 x 7.5 x 0.3cm) Al. Plate heatsink
KBU10005 THRU KBU1010
SINGLE-PHASE SILICON BRIDGE RECTIFIER
RATINGS AND CHARACTERISTIC CURVES
.