Green-Mode PWM Controller
GR8876
Green-Mode PWM Controller with Integrated Protections
Features
High-voltage (500V) startup circuit Current mode P...
Description
GR8876
Green-Mode PWM Controller with Integrated Protections
Features
High-voltage (500V) startup circuit Current mode PWM Very low startup current (<20uA) Under-voltage lockout (UVLO) Non-audible-noise green-mode control Programmable switching frequency Cycle-by-cycle peak current limiting Internal leading-edge blanking Internal slope compensation Internal 4ms soft start (Fs = 65KHz) VCC over-voltage clamp Gate output voltage clamp Soft driving for reducing EMI Over-voltage protection (OVP) on Vcc pin Over-load protection (OLP) Over-current protection (OCP) on CS pin 500mA driving capability
Applications
Open-frame SMPS
●
Switching AC/DC adapter and battery charger
Description
The GR8876 is a highly-integrated, low startup current, current mode PWM controller with
green-mode function and high-voltage start up circuit. A high-voltage current source supplies the
start up current and the traditional start up resistance can be saved in order to limit the power cost. The controller also includes the leading-edge blanking of the current sensing, internal slope compensation and cycle-by-cycle peak current limiting. It is also integrated soft driving for
reducing EMI, gate output voltage clamp function for protecting power MOSFET. GR8876 provides
several protections such as OLP, OVP, and OCP for fault conditions. The GR8876 improves the
performance and reduces the cost of power supplies. It is available in both 8-pin SOP and 8-pin DIP package.
Ordering and Marking Informat...
Similar Datasheet