Document
Aluminum Electrolytic Capacitors/ HA
Surface Mount Type
Series: HA Type: V
■ Features
● Endurance: 105 °C 1000 h ● Vibration-proof product is available upon request.
(08 mm and larger) ● AEC-Q200 qualified✽ ● RoHS directive compliant
Hight-temperature assuranceize
HA
↑
S
■ Specifications
Category Temp. Range
–40 °C to +105 °C
Rated W.V. Range
6.3 V.DC to 100 V.DC
Nominal Cap. Range
1 μF to 1500 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan d
Please see the attached standard products list
Characteristics at Low Temperature
W.V. (V)
6.3 10 16 25 35 50 63 100
Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 3 3
Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 4 4
(Impedance ratio at 120 Hz)
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits.
Endurance
Capacitance change ±20 % of initial measured value (6.3 W.V. of miniature : ±30 %)
tan d
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Resistance to Soldering Heat
Capacitance change ±10 % of initial measured value
tan d
< initial specified value
DC leakage current < initial specified value
■ Frequency correction factor for ripple current
Correction factor
50, 60 0.70
Frequency (Hz) 120 1 k 1.00 1.30
10 k to 1.70
■ Marking
Example:6.3 V 22 μF (Polarized) Marking color : BLACK
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
(Unit : mm)
0D±0.5 H
B±0.2 K
(I) (P) (I)
Negative polarity marking (–)
K )"
Lot number
Capacitance (μF)
Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark
Rated Voltage Mark j 6.3 V A 10 V C 16 V E 25 V
V 35 V H 50 V J 63 V 2A 100 V
L+
Pressure Relief (010 and larger)
W ( ) Reference size
Size code
B C D D8 E
D
4.0 5.0 6.3 6.3 8.0
L
5.4
+ -
0.1 0.2
5.4
+ -
0.1 0.2
5.4
+ -
0.1 0.2
7.7±0.3
6.2±0.3
A, B
4.3 5.3 6.6 6.6 8.3
HI
5.5 max. 6.5 max. 7.8 max. 7.8 max. 9.5 max.
1.8 2.2 2.6 2.6 3.4
W
0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1
PK
1.0
0.35
+ -
0.15 0.20
1.5
0.35
+ -
0.15 0.20
1.8
0.35
+ -
0.15 0.20
1.8
0.35
+ -
0.15 0.20
2.2
0.35
+ -
0.15 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
.