Document
ALUMINUM ELECTROLYTIC CAPACITORS
GU Snap-in Terminal Type, 105°C Standard series
Withstanding 3000 hours application of rated ripple current at 105°C. Compliant to the RoHS directive (2011/65/EU).
GW High Lipple Current
GU
Smaller
Low Profile
GN GJ
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to + 105°C (16 to 250V) , – 25 to +105°C (315 to 450V)
16 to 450V
47 to 47000µF
± 20% at 120Hz, 20°C
I 3 CV(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency : 120Hz at 20°C
Rated voltage(V) tan δ (MAX.)
16 0.50
25 0.40
35 0.35
50 0.30
63 0.25
80 • 100 160 to 420
0.20
0.15
450 0.20
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.)
Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C
Measurement frequency : 120Hz
16 to 100 4
160 to 250 3
20 12
315 to 450 8 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change tan δ Leakage current
Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
Drawing
Polarity bar Sleeve (P.E.T.)
L±2 Pressure relief vent
4.0 ± 0.5
10 ±0.1
10
0.8
+0.2 -0.1
0.8+-00..21
Type numbering system (Example : 200V 680µF)
1 2 3 4 5 6 7 8 9 10 11 12
LGU 2 D 6 8 1 ME L A
Configuration Capacitance tolerance (±20%) Rated capacitance (680µF)
Rated voltage (200V) Series name Type
Case dia. code
φD Code 20 Y 22 Z 25 A 30 B 35 C
φD +1MAX. 4.0± 0.5 2.5
2-2φ±0.1 (PC board hole dimensions)
1.5
+0.2 -0.1
(Terminal dimensions)
The other terminal is also available upon request. Please refer page 328 for schematic of dimensions.
Frequency coefficient of rated ripple current
Frequency (Hz) 50 60 120 300 1k 10k 50k or more
16 to 100V 0.88
0.90
1.00
1.07
1.15
1.15
1.15
Coeff. 160 to 250V 0.81
0.85
1.00
1.17
1.32
1.45
315 to 450V 0.77
0.82
1.00
1.16
1.30
1.41
1.50 1.43
Minimum order quantity : 50pcs. Dimension table in next page.
CAT.8100C
ALUMINUM ELECTROLYTIC CAPACITORS
GU series
Dimensions
Cap. (µF) 6800 8200 10000
12000
15000
18000
22000
27000
33000 39000 47000
Size φD ×L (mm)
22 × 25 22 × 30 22 × 30 25 × 25 22 × 35 25 × 30 .