LGU2C122MELC

ALUMINUM ELECTROLYTIC CAPACITORS GU Snap-in Terminal Type, 105°C Standard series Withstanding 3000 hours application of rated ripple current at 105°C. Compliant to the RoHS directive (2011/65/EU). GW High Lipple Current GU Smaller Low Profile GN GJ Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Performance Characteristics – 40 to + 105°C (16 to 250V) , – 25 to +105°C (315 to 450V) 16 to 450V 47 to 47000µF ± 20% at 120Hz, 20°C I 3 CV(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Measurement frequency : 120Hz at 20°C Rated voltage(V) tan δ (MAX.) 16 0.50 25 0.40 35 0.35 50 0.30 63 0.25 80 100 160 to 420 0.20 0.15 450 0.20 Rated voltage (V) Impedance ratio ZT/Z20 (MAX.) Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C Measurement frequency : 120Hz 16 to 100 4 160 to 250 3 20 12 315 to 450 8 — Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life Marking After storing the capacitors under no load at 105°...