ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
GU Snap-in Terminal Type, 105°C Standard series
Withstanding 3000 hours application of...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
GU Snap-in Terminal Type, 105°C Standard series
Withstanding 3000 hours application of rated ripple current at 105°C. Compliant to the RoHS directive (2011/65/EU).
GW High Lipple Current
GU
Smaller
Low Profile
GN GJ
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to + 105°C (16 to 250V) , – 25 to +105°C (315 to 450V)
16 to 450V
47 to 47000µF
± 20% at 120Hz, 20°C
I 3 CV(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency : 120Hz at 20°C
Rated voltage(V) tan δ (MAX.)
16 0.50
25 0.40
35 0.35
50 0.30
63 0.25
80 100 160 to 420
0.20
0.15
450 0.20
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.)
Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C
Measurement frequency : 120Hz
16 to 100 4
160 to 250 3
20 12
315 to 450 8 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 105°...
Similar Datasheet