ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
GU
Snap-in Terminal Type, 105 °C Standard
series
Withstanding 3000 hours application...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
GU
Snap-in Terminal Type, 105 °C Standard
series
Withstanding 3000 hours application of rated ripple current at 105°C. Compliant to the RoHS directive (2011/65/EU).
GW
High Lipple Current
GU
Smaller
Low Profile
GN
GJ
Specifications
Item Performance Characteristics
Category Temperature Range Rated Voltage Range Rated Capacitance Range
Capacitance Tolerance Leakage Current
– 40 to + 105°C (16 to 250V) , – 25 to +105°C (315 to 450V)
16 to 450V 47 to 47000µF ± 20% at 120Hz, 20°C I 3 CV(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency : 120Hz at 20°C Rated voltage(V) tan δ (MAX.)
Tangent of loss angle (tan δ)
16 0.50
25 0.40
35 0.35
50 0.30
63 0.25
80 100
160 to 420
0.20
0.15
450 0.20
Measurement frequency : 120Hz
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.)
Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C
16 to 100 4 20
160 to 250 3 12
Capacitance change tan δ Leakage current
315 to 450 8 —
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 3000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105°C for 1000 hours and th...
Similar Datasheet