Document
PC2SD11NTZ Series
PC2SD11NTZ Series
∗
VDRM : 400V Non-zero cross type DIP 6pin Phototriac Coupler for triggering
VDRM : 600V type is also available. (PC3SD11NTZ Series)
■ Description
PC2SD11NTZ Series Phototriac Coupler include an infrared emitting diode (IRED) optically coupled to an output Phototriac. These devices feature full wave control and are ideal isolated drivers for medium to high current Triacs. DIP package provides 5.0kV isolation from input to output with superior commutative noise immunity.
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. 2SD11) 2. Approved by CSA, file No. CA95323 (as model No. 2SD11) 3. Package resin : UL flammability grade (94V-0)
■ Applications
1. Triggering for Triacs used to switch on and off devices which require AC Loads. For example heaters, fans, motors, solenoids, and valves. 2. Triggering for Triacs used for implementing phase control in applications such as lighting control and temperature control (HVAC). 3. AC line control in power supply applications.
■ Features
1. High repetitive peak off-state voltage (VDRM : 400V) 2. Non-zero crossing functionality 3. 6 pin DIP package 4. Superior noise immunity (dV/dt : MIN. 1 000V/µs) 5. Lead-free components are also available (see Model Line-up section in this datasheet) 6. Double transfer mold construction (Ideal for Flow Soldering) 7. High isolation voltage between input and output (Viso(rms) : 5.0kV)
Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.: D2-A07401EN Date Mar. 31. 2004 © SHARP Corporation
PC2SD11NTZ Series ■ Internal Connection Diagram
1 2 3 6 5 4 1 2 3 4 5 6
Anode Cathode NC Anode/Cathode No external connection Cathode/Anode
■ Outline Dimensions
1. Through-Hole [ex. PC2SD11NTZ]
1.2 0.6
±0.2 ±0.3
(Unit : mm) 2. Wide Through-Hole Lead-Form [ex. PC2SD11NVZ]
0.6±0.2 Model No.
6 5
1.2±0.3
4
SHARP mark "S" Anode mark
6
5
4
Rank mark
2SD11
6.5±0.5
SHARP mark "S" Anode mark
Model No. Rank mark
2SD11
6.5±0.5 Date code (2 digit)
1 2 3
1
2
3
Date code (2 digit) Factory identification mark 7.62±0.3 0.5TYP. 3.5±0.5
7.12±0.5
Factory identification mark 7.62 0.5TYP. 3.5±0.5 2.7MIN.
±0.3
7.12±0.5
2.9±0.5
Epoxy resin 0.5±0.1 3.25±0.5
2.9±0.5
3.25±0.5
2.54±0.25
Epoxy resin θ θ : 0 to 13˚ θ 2.54
±0.25
10.16
±0.5
0.26
±0.1
0.5±0.1
Product mass : approx. 0.35g 3. SMT Gullwing Lead-Form [ex. PC2SD11NXP]
0.6
±0.2 6 5
Product mass : approx. 0.35g 4. Wide SMT Gullwing Lead-Form [ex. PC2SD11NWP]
0.6±0.2 1.2±0.3
5 4 6
1.2±0.3
4
SHARP mark "S" Anode mark
Model No. Rank mark 6.5±0.5
2SD11
SHARP mark "S" Anode mark
Model No. Rank mark 6.5
±0.5
2SD11
Date code (2 digit)
1 2 3
Date code (2 digit)
1 2 3
Factory identification mark
7.12±0.5
Factory identification mark 3.5±0.5
7.62±0.3 0.25±0.25
±0.1
7.62±0.3 0.26±0.1 3.5±0.5 0.35±0.25
7.12±0.5
0.4 1.0+ −0
Epoxy resin
0 10.0+ −0.5
0.4 1.0+ −0
0.26
2.54±0.25
2.54±0.25
Epoxy resin
10.16±0.5 12.0
MAX.
0.75±0.25
0.75±0.25
Product mass : approx. 0.33g ∗Pin
5
Product mass : approx. 0.34g
is not allowed external connection
Sheet No.: D2-A07401EN
2
PC2SD11NTZ Series Date code (2 digit)
1st digit Year of production A.D Mark 2002 A 2003 B 2004 C 2005 D 2006 E 2007 F 2008 H 2009 J 2010 K 2011 L 2012 M · · N · 2nd digit Month of production Month Mark January 1 February 2 March 3 April 4 May 5 June 6 July 7 August 8 September 9 October O November N December D
A.D. 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001
Mark P R S T U V W X A B C · · ·
repeats in a 20 year cycle
Factory identification mark
Factory identification Mark no mark Japan Indonesia Philippines China
* This factory marking is for identification purpose only. Please contact the local SHARP sales representative to see the actural status of the production.
Country of origin
Rank mark
Refer to the Model Line-up table
Sheet No.: D2-A07401EN
3
PC2SD11NTZ Series
■ Absolute Maximum Ratings
(Ta=25˚C) Parameter Symbol Rating Unit IF 50 mA Forward current Input VR 6 V Reverse voltage 0.1 IT(rms) A RMS ON-state current *3 Output Peak one cycle surge current 1.2 Isurge A 400 VDRM V Repetitive peak OFF-state voltage *1 5.0 Viso(rms) kV Isolation voltage −30 to +100 Topr ˚C Operating temperature −55 to +125 Tstg ˚C Storage temperature *2 270 *4 Tsol ˚C Soldering temperature
*1 40 to 60%RH, AC for 1minute, f=60Hz *2 For 10s *3 f=50Hz sine wave *4 Lead solder plating models: 260˚C
Soldering area
■ Electro-optical Characteristics
Parameter Forward voltage Input Reverse current Repentitive peak OFF-state current ON-state voltage Output Holding current Critical rate of.