PSN30-10AO

▣ Specifications INDUCTIVE PROXIMITY SENSOR(SQUARE AC 2WIRE) ▣ Mutual-interference & Influence by surrounding metals ◎Mutual-interference PSN30-10AO PSN30-10AC 10㎜ PSN30-15AO PSN30-15AC 15㎜ PSN40-20AO PSN40-20AC 20㎜ When several proximity sensors are mounted closely, malfunction of sensor may be caused due to mutual interference. Therefore, be sure to keep a minimum distance between the two sensors as below chart. Face to Face Parallel A B PSN SERIES M A N U A L Model PSN25-5AO PSN25-5AC 5㎜ Sensing distance Hysteresis Standard sensing target Setting distance Power supply (Operating voltage) Lackage current Response frequency Residual voltage Effect by Temp. Max. 10% of sensing distance 25×25×1㎜(Iron) 0 to 3.5㎜ 30×30×1㎜(Iron) 0 to 7㎜ 45×45×1㎜(Iron) 0 to 10.5㎜ 60×60×1㎜(Iron) 0 to 14㎜ m 100-240VAC 50/60Hz (85-264VAC) Max. 2.5mA 20㎐ Max. 10V Within ±10℃ max. of sensing distance at 20℃ in temperature range of -25 to 70℃ 5 to 200mA Min. 50㏁(at 500VDC megger) 1,500VAC 50/60㎐ for 1minute 1㎜ amplitude at frequency of 10 to 55㎐ in each of X, Y, Z directions for 2 hours 500㎨(50G) in X, Y, Z directions for 3 times Operating indicator(Red LED) -25 to 70℃, Storage: -30 to 80℃ 35 to 95%RH, Storage: 35 to 95%RH Surge protection IP67(IEC standards) Case: Heat-resistant ABS, Standard cable(Black): Polyvinyl chloride(PVC). Moving direction Target Item C ℓ d m ◎Influence by surrounding metals When sensors are mounted on metallic panel, it is required to protect the sensors from malfun...