Document
Ordering number : ENA0032
100 ±5 A (2.5) 100 ±5 B
(15) (16.55) 33.1±0.5 30.7±0.2 (1.2) Effective Area
AM-5412
Package Dimensions (unit : mm)
Overcoat Side Lead Wires
Light Receiving Side
Glass Juts(4 Corners) Width : 1.0MAX, Length : 15.0MAX
Wire Overcoat
(8)
50.1±0.5
Note: Glass Substrate Thickness Module Thickness Wire-Overcoat Thickness Standard lead wires length
42.0±0.2
Effective Area
: 1.8mm : 2.3mm max : 3.5mm max (Including Module) : 100mm Marking ( A & B )
(4.1)
Ratings at Ta = 25°C
Parameter Open Circuit Voltage Short Circuit Current
Operating Voltage & Operating Current
Operating Temperature Storage Temperature
Symbol Voc Isc
Iope
Topr Tstg
Conditions SS 50kLx SS 50kLx SS 50kLx, Vope=2.0V AM-1.5, 100mW/cm2, Vope=2.0V
SS: Solar Simulator
min 13.5
Ratings typ 3.1 17.8
max
39.0
-5 to +40 -20 to +70
Unit
V mA mA mA °C °C
Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before using any SANYO Semiconductor products described or contained herein in such applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein.
90606 / D1505HKIM No.A0032-1/2
AM-5412
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,se.