Piezo Audio Transducer
A. SCOPE
This specification applies piezo audio indicator, KPEG132 , KPEG132
B. SPECIFICATION
No. Item
1 Operating Fre...
Description
A. SCOPE
This specification applies piezo audio indicator, KPEG132 , KPEG132
B. SPECIFICATION
No. Item
1 Operating Frequency 2 Operating Volt. range 3 Operating Current 4 Sound pressure level 5 Rated Voltage 6 Tone 7 Operating temp. 8 Storage temp. 9 Dimension 10 Weight (MAX) 11 Material 12 Terminal
Environmental 13 Protection Regulation
Unit
KHz VDC mA dB VDC
mm gram
Specification
3.0 ± 0.5
3 ~ 28
MAX 8
MIN 83
12 Continuous
-30 ~ +85
-40 ~ +95
28.6 x H7.5
3.8 ABS UL-94 1/16” HB HIGH HEAT
BLACK Pin type ( /Plating Au)
RoHS
C. APPEARANCE DRAWING
Condition
at 12VDC at 30 cm/12VDC
See appearance drawing See appearance drawing
KPEG132 KINGSTATE
Tol : ± 0.5 Unit : mm
KINGSTATE ELECTRONICS CORP 2/6 KPEG132
D. MEASURING METHOD
1. S.P.L. Measuring Circuit
Mic : RION S.P.L. meter UC30 or equivalent
Mic : RION
UC30
2. The current consumption and the sound pressure level are measured by using the recommend driving circuit shown as below one example
KINGSTATE ELECTRONICS CORP 3/6 KPEG132
E. VOLTAGE: SOUND PRESSURE LEVEL / VOLTAGE: CURRENT CONSUMPTION
CHARACTERISTICS
/
F. MECHANICAL CHARACTERISTICS
No. Item
Test Condition
Evaluation standard
90% min. lead terminals shall be
1
Solderability
Lead terminals are immersed in rosin for 5 seconds and then immersed wet with solder. (Except the
in solder bath of +270±5 for 3±1 seconds.
edge of terminal)
5 , +270±5
3±1 .
90%
.( )
Lead terminal are immersed up to 1.5mm from sounder’s body in soilder
2
Soldering Hea...
Similar Datasheet