KPEG1501

A. SCOPE This specification applies piezo audio siren, KPEG1501 KPEG1501 B. SPECIFICATION No. Item 1 Operating Frequency 2 Operating Volt. range 3 Current consumption 4 Sound pressure level 5 Rated Voltage 6 Tone 7 Operating temp. 8 Storage temp. 9 Dimension 10 Weight (MAX) 11 Material 12 Terminal Environmental 13 Protection Regulation Unit KHz VDC mA dB VDC mm gram Specification 2 ~3 .5 6 ~ 14 MAX. 70 Typical 50 102 12 Siren -10 ~ + 60 -40 ~ + 80 L47.0 x W39.0 x H22.8 27.0 ABS UL-94 1/16”HB HIGH HEAT (BLACK) Wire type RoHS C. APPEARANCE DRAWING Condition at 12VDC at 30 cm/12VDC(MIN.) 10 minutes See appearance drawing See appearance drawing Tol : ± 0.5 Unit: mm KINGSTATE ELECTRONICS CORP 2/5 KPEG1501 D. MEASURING METHOD S.P.L. Measuring Circuit Mic : RION S.P.L. meter UC30 or equivalent Mic : RION UC30 E. VOLTAGE: SOUND PRESSURE LEVEL / VOLTAGE: CURRENT CONSUMPTION CHARACTERISTICS / KINGSTATE ELECTRONICS CORP 3/5 KPEG1501 F. MECHANICAL CHARACTERISTICS No. Item Test Condition Evaluation standard Solderability 90% min. stripped wires shall be Stripped wires of lead wires are immersed in rosin for 5 seconds and wet with solder.(Except the edge 1 then immersed in solder bath of +270±5 for 3±0.5 seconds. (Connector excepted) () 5 , +270±5 3±0.5 . of terminal) .( ) 90% The pull force shall be applied to double lead wire Lead Wire Pull Horizontal 3.0N(0.306kg) for 30 seconds. 2 Strength Vertical 2.0N(0.204kg) for 30 seconds. 3.0N(0.306kg) , No ...