Piezo Siren
A. SCOPE
This specification applies piezo audio siren, KPEG1600 KPEG1600
B. SPECIFICATION
No. Item
1 Operating Freque...
Description
A. SCOPE
This specification applies piezo audio siren, KPEG1600 KPEG1600
B. SPECIFICATION
No. Item
1 Operating Frequency 2 Operating Volt. range 3 Current consumption 4 Sound pressure level 5 Rated Voltage 6 Tone 7 Operating temp. 8 Storage temp. 9 Dimension 10 Weight (MAX) 11 Material 12 Terminal
Environmental 13 Protection Regulation
Unit
KHz VDC mA dB VDC
mm gram
Specification
2~4 6 ~ 16 MAX. 260 MIN. 105
12 Siren
-20 ~ + 60 -30 ~ + 70 54.5 x H56.0
91.6 ABS UL-94 1/16” HB
Wire type
RoHS
C. APPEARANCE DRAWING
Condition
at 12VDC at 100 cm/12VDC
See appearance drawing See appearance drawing
Tol : ± 0.5 Unit: mm
KINGSTATE ELECTRONICS CORP 2/5 KPEG1600
D. MEASURING METHOD
1. S.P.L. Measuring Circuit
Mic : RION S.P.L. meter UC30 or equivalent
Mic : RION
UC30
E. VOLTAGE:SOUND PRESSURE LEVEL / VOLTAGE:CURRENT CONSUMPTION
CHARACTERISTICS
/
KINGSTATE ELECTRONICS CORP 3/5 KPEG1600
F. MECHANICAL CHARACTERISTICS
No. Item
Test Condition
Evaluation standard
Solderability
90% min. stripped wires shall be Stripped wires of lead wires are immersed in rosin for 5 seconds and wet with solder.(Except the edge
1
then immersed in solder bath of +270±5 for 3±0.5 seconds.
(Connector excepted)
5,
+270±5
3±0.5 .
of terminal)
90% .(
)
The pull force shall be applied to double lead wire
Lead Wire Pull Horizontal 3.0N(0.306kg) for 30 seconds.
2
Strength
Vertical 2.0N(0.204kg) for 30 seconds.
3.0N(0.306kg)
,
No interference in operation.
2.0N(0.204kg)
.
, 30
B...
Similar Datasheet