Dual 12-/10-/8-Bit PWM to VOUT DACs
FEATURES
n No Latency PWM-to-Voltage Conversion n Voltage Output Updates and Settles within 8µs n 100kHz to 30Hz PWM I...
Description
FEATURES
n No Latency PWM-to-Voltage Conversion n Voltage Output Updates and Settles within 8µs n 100kHz to 30Hz PWM Input Frequency n ±2.5LSB Max INL; ±1LSB Max DNL (LTC2644-12) n Guaranteed Monotonic n Pin-Selectable Internal or External Reference n 2.7V to 5.5V Supply Range n 1.71V to 5.5V Input Voltage Range n Low Power: 2.7mA at 3V, <1µA
More View
Power-Down n Guaranteed Operation from –40°C to 125°C n 12-Lead MSOP Package
APPLICATIONS
n Digital Calibration n Trimming and Adjustment n Level Setting n Process Control and Industrial Automation n Instrumentation n Automotive
LTC2644 Dual 12-/10-/8-Bit PWM
to VOUT DACs with 10ppm/°C Reference
DESCRIPTION
The LTC®2644 is a family of dual 12-, 10-, and 8-bit PWM-to-voltage output DACs with an integrated high accuracy, low drift, 10ppm/°C reference in a 12-lead MSOP package. It has rail-to-rail output buffers and is guaranteed monotonic. The LTC2644 measures the period and pulse width of the PWM input signals and updates the voltage output DACs after each corresponding PWM input rising edge. The DAC outputs update and settle to 12-bit accuracy within 8µs typically and are capable of sourcing and sinking up to 5mA (3V) or 10mA (5V), eliminating voltage ripple and replacing slow analog filters and buffer amplifiers. The LTC2644 has a full-scale output of 2.5V using the 10ppm/°C internal reference. It can operate with an external reference, which sets the full-scale output equal to the external reference voltage. Each DAC enters a pin-selectable idle state when the PWM input is held unchanged for more than 60ms. The part operates from a single 2.7V to 5.5V supply and supports PWM input voltages from 1.71V to 5.5V.
All registered trademarks and trademarks are the property of their respective owners. Protected by U.S. Patents, including 5396245, 5859606, 6891433, 6937178, 7414561.
TYPICAL APPLICATION
PWM INPUTS 1.7V TO 5.5V
2-Channel PWM to Voltage Output DAC
0.1µF
INA VOUTA INB VOUTB
LTC2644
IOVCC
REF
PD VCC GND IDLSEL
REFSEL
GND
BUFFERED VOLTAGE OUTPUTS
2.7V TO 5.5V
INPUT: 1V TO 5.5V OUTPUT: 1.25V
0.1µF
0.1µF
2644 TA01a
PWM Input to DAC Output
INA 2V/DIV
VOUTA 500mV/DIV
20µs/DIV
2644TA01b
Document Feedback
For more information www.analog.com
Rev. B
1
LTC2644
ABSOLUTE MAXIMUM RATINGS
(Notes 1, 2)
Supply Voltages (VCC, IOVCC)... –0.3V to 6V INA, INB.. –0.3V to 6V IDLSEL, PD, REFSEL.. –0.3V to 6V VOUTA, VOUTB–0.3V to Min (VCC + 0.3V, 6V) REF–0.3V to Min (VCC + 0.3V, 6V) Operating Temperature Range LTC2644C.... 0°C to 70°C LTC2644I.–40°C to 85°C LTC2644H.
Similar Datasheet
- LTC2600 (LTC2600 - LTC2620) 3V/5V Octal 12-bit Rail-to-rail DAC - Linear Technology
- LTC2601 Rail-to-Rail DAC - Linear Technology
- LTC2602 (LTC2602 - LTC2622) Rail-to-rail DACs - Linear Technology
- LTC2604 (LTC2604 - LTC2624) Rail-to-rail Voltage Output DACs - Linear Technology
- LTC2605 (LTC2605 - LTC2625) Octal 16-Bit Rail-to-Rail DACs - Linear Technology
- LTC2606 (LTC26x6) 16-/14-/12-Bit Rail-to-Rail DACs - Linear Technology
- LTC2607 (LTC26x7) 16-/14-/12-Bit Dual Rail-to-Rail DACs - Linear Technology
- LTC2609 (LTC26x9) Quad 16-/14-/12-Bit Rail-to-Rail DACs - Linear Technology
- LTC2610 (LTC2600 - LTC2620) 3V/5V Octal 12-bit Rail-to-rail DAC - Linear Technology
- LTC2611 Rail-to-Rail DAC - Linear Technology