Micropower dual CMOS voltage comparators
TSX3702
Datasheet
Micropower dual CMOS voltage comparators
D SO8 (plastic micropackage)
P TSSOP8 (thin shrink small out...
Description
TSX3702
Datasheet
Micropower dual CMOS voltage comparators
D SO8 (plastic micropackage)
P TSSOP8 (thin shrink small outline package)
S MiniSO8 (plastic package)
DFN8 2x2 mm (plastic micropackage)
Product status link TSX3702
Features
Low supply current: 5 µA typ. per comparator Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) Extremely low input bias current: 1 pA typ. Input common-mode voltage range includes ground Push-pull output High input impedance: 1012 Ω typ Fast response time: 2.7 µs typ. for 5 mV overdrive ESD tolerance: 4 kV HBM, 200 V MM
Applications
Automotive Industrial
Description
The TSX3702 is a micropower CMOS dual voltage comparator which exhibits a very low current consumption of 5 µA typical per comparator. This device was designed as the improvement of the TS3702: it shows a lower current consumption, a better input offset voltage, and an enhanced ESD tolerance. The TSX3702 is fully specified over a wide temperature range and is proposed in automotive grade for the SO8 package. It is fully compatible with the TS3702 CMOS comparator and is available with similar packages. New tiny packages (MiniSO8 and DFN8 2x2 mm) are also proposed for the TSX3702 thus allowing even more integration on applications.
Related products
See TSX393
for open drain output products
DS10241 - Rev 6 - January 2023 For further information contact your local STMicroelectronics sales office.
www.st.com
1
Package pin connections
Fig...
Similar Datasheet