dsPIC33EV128GM006

dsPIC33EVXXXGM00X/10X dsPIC33EVXXXGM00X/10X Flash Programming Specification 1.0 DEVICE OVERVIEW This document defines the programming specification for the dsPIC33EVXXXGM00X/10X 16-bit Digital Signal Controller (DSC) families. This programming specification is required only for those developing programming support for the following devices: dsPIC33EV64GM002 dsPIC33EV64GM004 dsPIC33EV64GM006 dsPIC33EV64GM102 dsPIC33EV64GM104 dsPIC33EV64GM106 dsPIC33EV256GM002 dsPIC33EV256GM004 dsPIC33EV256GM006 dsPIC33EV256GM102 dsPIC33EV256GM104 dsPIC33EV256GM106 dsPIC33EV128GM002 dsPIC33EV128GM004 dsPIC33EV128GM006 dsPIC33EV128GM102 dsPIC33EV128GM104 dsPIC33EV128GM106 Customers only using these devices for application development should use development tools that already provide support for device programming. Topics covered include: Section 1.0 “Device Overview” Section 2.0 “Programming Overview” Section 3.0 “Device Programming – ICSP” Section 4.0 “Device Programming – Enhanced ICSP” Section 5.0 “Programming the Programming Executive to Memory” Section 6.0 “The Programming Executive” Section 7.0 “Device ID” Section 8.0 “Checksum Computation” Section 9.0 “AC/DC Characteristics and Timing Requirements” 2.0 PROGRAMMING OVERVIEW There are two methods of programming that are discussed in this programming specification: In-Circuit Serial Programming™ (ICSP™) Enhanced In-Circuit Serial Programming The ICSP programming method is the mo...