Surface Mount Polymer-Tantalum Capacitor
FEATURES • Low ESR and Very High Capacitance • Values from 47μF to 1,500μF • B2 (3.5mm x 2.8mm) and D (7.3mm x 4.3mm) Case Size
NTPS Series
CHARACTERISTICS
Capacitance Range Capacitance Tolerance Rated Voltage Range @ 105°C (Vdc)
Operating Temperature Range
Dissipation Factor Leakage Current @ +25°C (After 5 Minutes at Rated Voltage)
Impedance Ratio
Resistance to Soldering Heat (+260°C for 5 Seconds) Moisture Resistance
(500 hours; 90~95% RH @ +60°C) Load Life at Rated Voltage
2,000 hours @ 105°C (except B2) B2 & +85°C parts 1,000 hours @ +105°C
Base Failure Rate
47µF to 1,500µF ±20% (M)
2.0Vdc ~ 10Vdc -55°C ~ +105°C (Some parts require voltage derating for operation above +85°C. See part number tables for details)
See Specifications Table
Z-55°C/Z+20°C within 0.6 ~ 2.0 Z+105°C/Z+20°C within 0.6 ~ 2.0 ∆C ±10% of initial measured value, LC = Less than 300% spec. max. value DF = Less than 200% of specified max. value ∆C -20% ~ +50% Max, LC = <300% of specified max. value DF = 150% of specified max. value
∆C ±20% Max, LC = Less than initial specification DF = 150% of specified max. value
B2 case size: 1%/1000 hours at +105°C and rated voltage Other sizes: 0.5%/1000 hours at +105°C and rated voltage B2 case size: 1%/1000 hours at +85°C and rated voltage Other sizes: 0.5%/1000 hours at +85°C and rated voltage
STANDARD VALUES AND CASE SIZES
Rated Voltage
2.0 2.5
Surge Voltage
2.3 2.9
Capacitance (µF) Code Case Size Case Size
47 470 -
-
68 680 -
-
100 101 -
-
120 121 -
-
150 151 -
-
220
221 -
B2, D2
330
331 B2
B2, D2
470 471 B2 D2
680 681 -
D3
1000
102 -
D9
1500
152 -
D9
4.0 4.6 Case Size
B2 B2, D2 B2, D2 D2 D3 -
6.3 7.2 Case Size
B2, D2 B2 B2, D2 B2, D2 D2, D3, D9 D1, D9 D9 -
8.0 9.2 Case Size
B2 -
10 12 Case Size B2 D2 D3 D9 -
PART NUMBER SYSTEM NTPS 221 M 6 D2 U L T F
RoHS Compliant T = Tape & Reel L = +85°C Temperature Rating Special Performance Code (See specifications tables) Case Size Code Voltage Code Tolerance Code (M = ± 20%) Capacitance Code (1st two digits signficant, 3rd is multiplier) Series
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel:
[email protected]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 SPECIFICATIONS ARE SUBJECT TO CHANGE
Surface Mount Polymer-Tantalum Capacitor
NTPS Series
-55°C ~ +85°C (+105°C with derating) STANDARD VALUES AND SPECIFICATIONS
NIC Part Number
Capacitance Value (μF)
Rated Voltage (Vdc)
<+85°C*
Rated Voltage Derated for
Operation >+85°C * (Vdc)
LC (mA) after
5 minutes
NTPS331M2B2ZLTF
330
2.0
1.8 132
NTPS331M2B2YLTF
330
2.0
1.8 132
NTPS471M2B2ZLTF
470
2.0
1.8 188
NTPS221M2.5B2YLTF
220
2.5
2.0 110
NTPS22.