DatasheetsPDF.com

AMMP-6120 Dataheets PDF



Part Number AMMP-6120
Manufacturers AVAGO
Logo AVAGO
Description 8-24 GHz x2 Frequency Multiplier
Datasheet AMMP-6120 DatasheetAMMP-6120 Datasheet (PDF)

AMMP-6120 8-24 GHz x2 Frequency Multiplier Data Sheet Description Avago Technologies’ AMMP-6120 is an easy-to-use integrated frequency multiplier (x2) in a surface mount package designed for commercial communication systems. The MMIC takes a 4 to 12 GHz input signal and doubles it to 8 to 24 GHz. It has integrated amplification, matching, harmonic suppression, and bias networks. The input/output are matched to 50  and fully DC blocked. The MMIC is fabricated using PHEMT technology. The backsid.

  AMMP-6120   AMMP-6120



Document
AMMP-6120 8-24 GHz x2 Frequency Multiplier Data Sheet Description Avago Technologies’ AMMP-6120 is an easy-to-use integrated frequency multiplier (x2) in a surface mount package designed for commercial communication systems. The MMIC takes a 4 to 12 GHz input signal and doubles it to 8 to 24 GHz. It has integrated amplification, matching, harmonic suppression, and bias networks. The input/output are matched to 50  and fully DC blocked. The MMIC is fabricated using PHEMT technology. The backside of the package is both RF and DC ground. This helps simplify the assembly process and reduces assembly related performance variations and costs. The surface mount package allows elimination of “chip & wire” assembly for lower cost. This MMIC is a cost effective alternative to hybrid (discrete-FET), passive, and diode doublers that require complex tuning and assembly processes. Package Diagram NC Vdd NC 1 23 Features  5x5mm Surface Mount Package  Frequency Range : 8-24 GHz output (Useable to 26 GHz)  Broad input power range: -11 to +5 dBm  Output Power : +16 to +18 dBm  Harmonic Suppression : 20 dBc (Fundamental)  DC requirements : -1.4V and 5V, 112 mA @ Pin= +3dBm Applications  Microwave Radio systems  Satellite VSAT and DBS systems  802.16 & 802.20 WiMax BWA systems  WLL and MMDS loops Functional Block Diagram Vd Vg 12 3 RF IN 8 4 RF OUT 765 NC NC NC RoHS-Exemption Please refer to hazardous substances table on page 7. RFin 8 X2 765 top view package base: RF and DC GND 4 RFout Pin Function 1 Vd 2 Vg 3 4 RF Out 5 6 7 8 RF In Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model (Class A) = 40V ESD Human Body Model (Class 1A) = 250V Refer to Avago Application Note A004R: Electrostatic Discharge Damage and Control. Note: MSL Rating = Level 2A Electrical Specifications 1. Small/Large -signal data measured in a fully de-embedded test fixture form TA = 25°C. 2. Pre-assembly into package performance verified 100% on-wafer per AMMC-6120 published specifications. 3. This final package part performance is verified by a functional test correlated to actual performance at one or more frequencies. 4. Specifications are derived from measurements in a 50 Ω test environment. Aspects of the amplifier performance may be improved over a more narrow bandwidth by application of additional conjugate, linearity, or low noise (Гopt) matching. Table 1. RF Electrical Characteristics Parameter Min Output Power, Pout 13 Input Power at 1dB Gain Compression, IP-1dB Input Return Loss, Rlin Output Return Loss, Rlout Fundamental Suppresion, Sup 18 3rd Harmonic Suppression, Sup3 4th Harmonic Suppression, Sup4 Single Side Band Phase Noise (@100kHz offset, fout=15.6GHz) -140 Typ. 16 2 -15 -10 25 25 35 Max Unit dB dBm dB dB dBc dBc dBc dBc Table 2. Recommended Operating Range 1. Ambient operational temperature TA = 25°C unless otherwise noted. 2. Channel-to-backside Thermal Resistance (Tchannel (Tc) = 34°C).


AMMP-6125 AMMP-6120 AMMP-6532


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)