DatasheetsPDF.com

P42L6A-T1 Dataheets PDF



Part Number P42L6A-T1
Manufacturers Haier
Logo Haier
Description PDP Module
Datasheet P42L6A-T1 DatasheetP42L6A-T1 Datasheet (PDF)

-1- Service Manual Model: P42L6A-T1 Specifications & Design are subject to change without notice. -2- Contents 1. Contents……………………………………………………………...1 2. Features……………………………………………………………...2 3. Safety Precautions……………………………………….3 4. Photo of PDP taking apart…………………………….……………6 5. PANEL Part…………………………………………………………..8 a. Adjustment……………………………………………………….8 b. Trouble Shooting………………………………………………10 c. Power specification……………………………………………20 6. Introduction to PDP circuit boards………………………………...

  P42L6A-T1   P42L6A-T1


Document
-1- Service Manual Model: P42L6A-T1 Specifications & Design are subject to change without notice. -2- Contents 1. Contents……………………………………………………………...1 2. Features……………………………………………………………...2 3. Safety Precautions………………………………………................3 4. Photo of PDP taking apart…………………………….……………6 5. PANEL Part…………………………………………………………..8 a. Adjustment……………………………………………………….8 b. Trouble Shooting………………………………………………10 c. Power specification……………………………………………20 6. Introduction to PDP circuit boards………………………………..23 a: Signal flow-chart………………………………………………23 b: CHIP SUMMARY……………………………………………..24 c: Debug flow-chart………………………………………………25 7. Circuit Drawing……………………………………………………..26 -3- 1. Features The 42” PDP provides quality image displays and is suitable for a variety of multimedia applications. a. Available Input signals: The Digital module provides RGB (D-SUB15 PIN) and digital DVI input connectors, and component video (RCA) input connectors. It supports the quality input image of DVD and HDTV (480P/720P/1080i/1080P). The analogue module provides composite video (RCA), S-video (DIN4P), The analogue module also provides one set of stereo audio input connectors (RCA). The product supports PC image resolutions up to XGA (1024 768) with a vertical frequency of 75HZ. RF terminal,you can watch TV expediently,The format contain PAL-M/N,NTSC-M b. General specification Model name: P42L6A-T1(H) Number of pixel:1024(H) 768(V) (1Pixel=3RGB Cells) Display area : 920.1(H) x 518.4(V) 0.5mm Color arrangement : RGB Closed type Number of COLRO : (R)1024 x (G)1024 x (B)1024 Aspect Ratio : 16:9 Peak Brightness : Typical 1200dc/ (1/100 White Window) Contrast Ratio : Typical 10000:1(Dark room 1/100 White Window) (White Window Pattern at Center) POWER CONSUMPTION : Typical 320 W(Full White) Available voltage range:AC110V~240V Frequency range:50~60HZ( 3HZ) -4- 2. Safety Precautions When servicing of PDP Module, it should be not enforced into another way aside next rule, or a unaccustomed person should not repairing. When using/handling this PDP Module, pay attention to the below warning and cautions. Warning Indicates a hazard that may lead to death or injury if the warning is ignored and the product is handled incorrectly. Caution Indicates a hazard that can lead to injury or damage to property if the caution is ignored and the product is handled incorrectly. 1) WARNING (1) Do not touch Signal and Power Connector while this product operates. Do not touch EMI ground part and Heat Sink of Film Filter. (2) Do not supply a voltage higher than that specified to this product. This may damage the product and may cause a fire. (3) Do not use this product in locations where the humidity is extremely high, where it may be splashed with water, or where flammable materials surround it. Do not install or use the product in a location that does no satisfy the specified environmental conditions. This may damage the product and may cause a fire. (4) If a foreign substance (such as water, metal, or liquid) gets inside the product, immediately turn off the power. Continuing to use the product, it is may cause fire or electric shock. (5) If the product emits smoke, and abnormal smell, or makes an abnormal sound, immediately turn off the power. Continuing to use the product, it may cause fire or electric shock. (6) Do not disconnect or connect the connector while power to the product is on. It takes some time for the voltage to drop to a sufficiently low level after the power has been turned off. Confirm that the voltage has dropped to a safe level before disconnecting or connecting the connector. (7) Do not pull out or insert the power cable from/to an outlet with wet hands. It may cause electric shock. (8) Do not damage or modify the power cable. It may cause fire or electric shock. (9) If the power cable is damaged, or if the connector is loose, do not use the product: otherwise, this can lead to fire or electric shock. (10) If the power connector or the connector of the power cable becomes dirty or dusty, wipe it with a dry cloth.0therwise, this can lead to fire. (11) PDP Module uses a high voltage (Max.450V dc). Keep the cautions concerning electric shock and do not touch the Device circuitry when handling the PDP Unit. And because the capacitor of the Device circuitry may remain -5- charged at the moment of Power OFF, standing by for 1 minute is required in order to touch the Device circuitry. 2) CAUTIONS (1) Do not place this product in a location that is subject to heavy vibration, or on an unstable surface such as an inclined surface. The product may fall off or fall over causing injuries. (2) Before disconnecting cable from the product, be sure to turn off the power. Be sure to hold the connector when disconnecting cables. Pulling a cable with excessive force may cause the core of the cable to be exposed or break the cable, and this can lead to fire or electric shock. (3) This product should be moved by two or more persons. If one person attempts to carry thi.


OV7461 P42L6A-T1 1800FP


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)