Document
ALUMINUM ELECTROLYTIC CAPACITORS
AK Snap-in Terminal Type, Permissible Abnormal Voltage, Wide Temperature Range series
Withstanding 2000 hours application of rated ripple current at 105°C. Extended voltage range at 200V, 400V and 420V. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the RoHS directive (2002/95/EC).
AK
Smaller
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Stability at Low Temperature Endurance
Shelf Life
Safety Performance
Marking
AQ
Performance Characteristics
– 25 ~ +105°C
200 • 400 • 420V
33 ~ 1200µF
± 20% at 120Hz, 20°C
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
0.20MAX. 120Hz 20°C
Rated voltage(V) Impedance ratio (MAX) Z – 25°C/Z+20°C
200 8
400 • 420 8
Measurement frequency : 120Hz
After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right.
Capacitance change Within ±20% of initial value
tan δ
200% or less of initial specified value
Leakage current
Initial specified value or less
After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right.
Capacitance change Within ±15% of initial value
tan δ
150% or less of initial specified value
Leakage current
Initial specified value or less
The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and/or case.
rating
test conditions
Voltage (V)
Capacitance (µF)
Limited DC current
Test voltage
330 C < 330
4A
200 330 C < 470 5 A 300VDC and 375VDC
470 C < 470
7A
330 C < 100
2A
400 100 C < 220 4 A 500VDC and 600VDC
220 C < 470
7A
330 C < 100
2A
420 100 C < 220 4 A 520VDC and 630VDC
220 C < 470
7A
Printed with white color letter on black sleeve
Drawing
(BcoodtteomZBpolantley)
Polarity bar Sleeve (P.E.T.)
f D +1MAX. 4.0±0.5 2.5
L±2 Pressure relief vent
10±0.1
10 4.0±0.5
0.8 +-00..12
0.8+-00.2.1
2-2f±0.1 (PC board hole dimensions)
1.5+-00..12 (Terminal dimensions)
Type numbering system (Example : 200V 680µF)
L1 A2 K3 24 D5 66 87 18 M9 E10 1L1 1A2 153 104 15 16
Bottom Plate
Configuration Capacitance tolerance (±20%) Rated Capacitance (680µF)
Rated voltage (200V)
Case length code Case dia. code fD Code
ZB WPlaithteBottom
code less WBoitthtoomutPlate
22 Z
25 A
30 B
35 C
Series name
Type
Please contact to us if other configurations are required.
Minimum order quantity : 50pcs. Dimension table in next page.
CAT.8100V
ALUMINUM ELECTROLYTIC CAPACITORS
AK series
Dimensions
Cap.(µF)
V(Code) Code φD
33 330
22
39 390 47 470 22 × 20
0.35 56 560
68 680
82 820 100 101 22 × 20
0.50 120 121
150 151
180 181 22 × 25 0.70
220 221 22 × 25 0.74
270 271 22 × 30 0.90
330 331 22 × 30 1.05
390 391 22 × 35 1.20
470 471 22 × 40 1.30
560 561 22 × 45 1.50
680 681
820 821
1000
102
1200
122
200V (2D) 25 30
25 × 20 0.65
30 × 20 0.70
25 × 25 0.85
25 × 30 1.05
25 × 30 1.20
25 × 35 1.30
25 × 40 1.50
25 × 50 1.70
30 × 25 1.05
30 × 25 1.20
30 × 25 1.35
30 × 35 1.55
30 × 40 1.70
30 × 45 1.99
30 × 50 2.10
35
35 × 20 1.10
35 × 25 1.55
35 × 30 1.70
35 × 35 1.99
35 × 40 2.10
35 × 50 2.30
22 22 × 20
0.22 22 × 20
0.30 22 × 25
0.35 22 × 25
0.38 22 × 25
0.40 22 × 30
0.50 22 × 35
0.55 22 × 40
0.60 22 × 45
0.70 22 × 50
0.80
400V (2G) 25 30
25 × 20 0.35
25 × 20 0.38
25 × 25 0.45
25 × 25 0.50
25 × 30 0.53
25 × 30 0.60
25 × 35 0.70
25 × 40 0.80
25 × 45 0.90
30 × 20 0.40
30 × 20 0.50
30 × 20 0.50
30 × 25 0.53
30 × 25 0.60
30 × 30 0.70
30 × 30 0.80
30 × 35 0.90
30 × 40 0.98
30 × 50 1.21
35
35 × 20 0.55
35 × 25 0.70
35 × 25 0.80
35 × 30 0.90
35 × 35 0.96
35 × 40 1.21
35 × 45 1.32
35 × 50 1.45
22 22 × 25
0.25
420V (W6) 25 30
35
22 × 25 0.35
22 × 25 0.38
22 × 30 0.45
22 × 35 0.64
22 × 40 0.69
22 × 45 0.75
25 × 25 0.45
25 × 30 0.64
25 × 30 0.69
25 × 35 0.75
25 × 40 0.82
25 × 45 0.90
30 × 25 0.69
30 × 30 0.75
30 × 30 0.82
30 × 35 0.90
30 × 40 1.00
30 × 45 1.10
35 × 25 0.75
35 × 25 0.82
35 × 30 0.90
35 × 35 1.00
35 × 40 1.10
35 × 45 1.20
Case size Rated φ D × L (mm) ripple
Rated Ripple (Arms) at 105°C 120Hz
Frequency coefficient of rated ripple current
Frequency (Hz) 200V
Coefficient 400 • 420V
50 0.85 0.88
60 0.88 0.90
120 1.00 1.00
1k 1.15 1.10
10k~ 1.20 1.15
CAT.8100V
.