ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
AQ Snap-in Terminal Type, Permissible Abnormal Voltage, Smaller-sized, Wide Temperature...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
AQ Snap-in Terminal Type, Permissible Abnormal Voltage, Smaller-sized, Wide Temperature Range (692 type) series
Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. Smaller case sizes and higher ripple current than AK series. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the RoHS directive (2002/95/EC).
AK
Smaller
AQ
Specifications
Item Performance Characteristics
Category Temperature Range
–25 ~ +105°C
Rated Voltage Range
200 220 400V
Rated Capacitance Range 33 ~ 1500µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current tan δ Stability at Low Temperature
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
0.20MAX. 120Hz, 20°C
Rated voltage(V) Impedance ratio (MAX) Z – 25°C/Z+20°C
200 220 8
400 8
Measurement frequency : 120Hz
Endurance
After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right.
Capacitance change tan δ Leakage current
Within ±20% of initial value 200% or less of initial specified value Initial specified value or less
Shelf Life Safety Performance Marking
After storing the capacitors under no load at 105°C for 1000 hours, and after perf...
Similar Datasheet