LAR2E331MELZ30

ALUMINUM ELECTROLYTIC CAPACITORS AR Snap-in Terminal Type, 105°C Permissible Overvoltage series Withstanding 2000 hours application of rated ripple current at 105°C. Reduction of short incidence when overvoltage (rated voltage x 1.5) is applied to a capacitor. Compliant to the RoHS directive (2002/95/EC). AR GUPermissible Overvoltage Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics – 40 to +105˚C (200 250V), – 25 to +105˚C (400 450V) 200 to 450V 82 to 2200µF ± 20% at 120Hz, 20˚C 1 3 CV(µA) (After 5 minutes' application of rated voltage [C : Rated Capacitance(µF), V : Voltage ( V ) ] Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 200 to 400 0.15 450 0.20 Measurement frequency : 120Hz, Temperature : 20˚C Stability at Low Temperature Rated voltage(V) Impedance ratio Z – 25°C / Z+20°C ZT/Z20(MAX.) Z – 40°C / Z+20°C Measurement frequeny : 120Hz 200 250 3 12 400 450 8 ----- Endurance Shelf Life The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. Capacitance change tan δ Leakage ...