Document
ALUMINUM ELECTROLYTIC CAPACITORS
GR Snap-in Terminal Type, 105°C Long Life Assurance series
Long life assurance series withstanding 10000 hours application of ripple current at 105°C. Compliant of the RoHS directive (2002/95/EC).
GR
Long Life GY
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to +105°C (200 250V) , – 25 to +105°C (400 450V)
200 to 450V
39 to 1500µF
± 20% at 120Hz, 20°C
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage(V)
200 to 400
450
tan δ (MAX.)
0.15
0.20
Rated voltage (V)
Impedance ratio ZT/Z20 (MAX.)
Z– 25°C/ Z+20°C Z– 40°C/ Z+20°C
Measurement frequency : 120Hz
200 250
400 450
38 12 —
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 10000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 25% of the initial capacitance value 250% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right.
Capacitance change tan δ Leakage current
Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
Marking
Printed with white color letter on black sleeve.
φD +1.5 MAX. 4.0±0.5 2.5
Drawing
Polarity bar Sleeve (P.E.T.)
L±2 Pressure relief vent
10 ±0.1
4.0±0.5
10
0.8
+0.2 -0.1
0.8 +-00..21
Type numbering system (Example : 400V 120µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
LGR 2G 1 2 1 ME L Z 4 0
Configuration Capacitance tolerance (±20%) Rated capacitance (120µF)
Rated voltage (400V) Series name Type
Case length code Case dia. code
φD Code 22 Z 25 A 30 B 35 C
2 - 2 φ ±0.1 (PC board hole dimensions)
+0.2
1.5 -0.1 (Terminal dimensions)
The other terminal is also available upon request. Please refer page 272 for schematic of dimensions.
Frequency coefficient of rated ripple current
Frequency (Hz) 50 60 120 300 1k 10k 50k or more
200 • 250V Coeff.
400 • 450V
0.81 0.77
0.85 0.82
1.00 1.00
1.17 1.16
1.32 1.30
1.45 1.41
1.50 1.43
Minimum order quantity : 50pcs. Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
GR series
Dimensions
Cap. (µF) 220 270 330
390
470
560
680
820
1000 1200 1500
Size
φD × L(mm)
22 × 25 22 × 30 25 × 25 22 × 30 25 × 25 22 × 35 25 × 30 30 × 25 22 × 40 25 × 35 30 × 30 22 × 45 25 × 35 30 × 30 25 × 40 30 × 35 25 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 50
200.