Document
ALUMINUM ELECTROLYTIC CAPACITORS
HC Low Impedance series
Lower impedance than HD series. Compliant to the RoHS directive (2002/95/EC).
Products which are scheduled to be discontinued. Not recommended for new designs
HC
Low Impedance
HD
Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C
Specifications
ltem Performance Characteristics
Category Temperature Range – 40 to +105˚C
Rated Voltage Range
6.3 to 35V
Rated Capacitance Range 4.7 to 1000µF
Capacitance Tolerance Leakage Current
± 20% at 120Hz, 20˚C After 2 minutes' application of rated voltage, leakage current is less than 0.01CV or 3 (µA), whichever is greater.
Tangent of loss angle (tan δ)
Rated voltage (V) tan δ (MAX.)
6.3 0.15
10 0.13
16 0.12
25 0.10
35 0.10
120Hz 20˚C
Rated voltage (V) 6.3 10 16 25 35 120Hz Stability at Low Temperature
Impedance ratio ZT / Z20 (MAX.) Z–40˚C / Z+20˚C
2
2
2
2
2
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 2000 hours (1000 hours for φD=4, 5 and 6.3) at 105˚C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Marking
Printed with white color letter on black sleeve.
φD+0.5 MAX. P±0.5
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure relief vent
(φ6.3up)
L+ MAX.
15MIN
(No pressure relief vent for 7mmL products)
4MIN
(L = 7) 1.0 (L 11) 1.5
φD 4 5 6.3 8
P 1.5 2.0 2.5
φd
0.45
0.45
0.5 (0.45)
( ) : Applied to 7mmL products
3.5 0.6
(mm) 10 5.0 0.6
• Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 10V 470µF)
1 2 3 4 5 6 7 8 9 10 11
UHC 1 A 4 7 1 M PD
Configuration
φD
4 5 6.3 (7L)
Pb-free leadwire Pb-free PET sleeve
DD
6.3 (11L)
ED
8 · 10
PD
Configuration
Capacitance tolerance (± 20%) Rated capacitance (470µF) Rated voltage (10V) Series name Type
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
HC series
Standard Ratings
V (Code)
Cap.(µF)
22 33 47 100 220 330 470 1000
Item Code
220 330 470 101 221 331 471 102
Case size
φD × L
(mm)
4×7 5×7 6.3 × 7 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16
6.3 (0J)
Impedance Rated ripple
(Ω ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
0.48 0.26 0.15 0.077 0.043 0.043 0.024
230 350 480 640 910 910 1650
Case size
φD × L
(mm)
4×7 5×7 5×7 6.3 × 7 8 × 11.5 8 × 11.5 10 × 12.5
10 (1A)
Impedance Rated ripple
(Ω ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
0.49
230
0.26
350
0.26
350
0.15
480
0.044
910
0.043
910
0.030
1230
Case size
φD × L
(mm)
5×7 5×7 6.3 × 7 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16
16 (1C)
Impedance Rated ripple
(Ω ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
0.26 350
0.26 350
0.15 480
0.078
640
0.044
910
0.030
1230
0.025
1650
Cap. (µF)
4.7 10 22 33 47 100 220 330
V (Code)
Item Code
4R7 100 220 330 470 101 221 331
Case size
φD × L
(mm)
4×7 5×7 6.3 × 7 6.3 × 7 6.3 × 11 10 × 12.5 10 × 16
25 (1E)
Impedance Rated ripple
(Ω ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
0.52 0.27 0.16 0.15 0.078 0.031 0.026
230 350 480 480 640 1230 1650
Case size
φD × L
(mm)
4×7 5×7 6.3 × 7 6.3 × 7 6.3 × 11 8 × 11.5 10 × 16
35 (1V)
Impedance Rated ripple
(Ω ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
0.64
230
0.33
350
0.17
480
0.16
480
0.089
640
0.048
910
0.026
1650
Frequency coefficient of rated ripple current
Cap. (µF)
Frequency 120Hz
1kHz
10kHz
4.7 to 33
0.40
0.68
0.90
47 to 330
0.47
0.75
0.95
470 to 1000
0.55
0.85
0.98
100kHz 1.00 1.00 1.00
CAT.8100Z
.