Document
ALUMINUM ELECTROLYTIC CAPACITORS
KS Snap-in Terminal Type, For Audio Equipment, Smaller-sized series
Smaller and high-tone quality than KG series TYPE-1 grade. An effect to tone quallity improvement by replacement from a small standard product to use. Compliant to the RoHS directive (2002/95/EC).
KG
TYPE -1
Smaller
KS
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Performance Characteristics
– 40 to +85°C
25 to 100V
680 to 33000µF
± 20% at 120Hz, 20°C After 5 minutes' application of rated voltage, leakage current is not more than 3 CV (µA), [C : Rated Capacitance(µF), V : Voltage ( V ) ]
For capacitance of more than 22000µF, add 0.02 for every increase of 1000µF.
Rated voltage(V)
25 to 71
80 • 100
tan δ (MAX.)
0.30
0.25
Measurement frequency : 120Hz, Temperature : 20°C
Stability at Low Temperature
Rated voltage(V)
Impedance ratio ZT/Z20(MAX.)
Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C
25 to 100 4 12
Measurement frequency : 120Hz
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with silver color letter on black sleeve.
Drawing
Polarity bar Sleeve (P.E.T.)
Type numbering system (Example : 35 V 8200µF)
1 2 3 4 5 6 7 8 9 10 11 12
L KS 1 V 8 2 2 ME S A
φ D +1MAX. 6.3 ±1 3.5
L± 2 Pressure relief vent
10 ±0.1
6.3±1
10
0.8
+0.2 - 0.1
0.8+-00.2.1
2-2 φ±0.1
(PC board hole dimensions)
1.5
+0.2 - 0.1
(Terminal dimensions)
Configuration Capacitance tolerance (±20%)
Rated capacitance (8200µF) Rated voltage (35V) Series name Type
Case dia.code
φD Code 20 Y 22 Z 25 A 30 B 35 C
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
KS series
Dimensions
Cap. (µF) 3300 4700 5600
6800
8200
10000
12000
15000 18000 22000 27000 33000
Size
φD × L (mm)
22 × 20 20 × 25 25 × 20 20 × 30 22 × 25 20 × 35 22 × 30 25 × 25 30 × 20 20 × 40 22 × 35 20 × 45 22 × 40 25 × 30 30 × 25 35 × 20 20 × 50 22 × 45 25 × 35 30 × 30 35 × 25 22 × 50 25 × 40 25 × 50 30 × 35 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45
25V (1E)
Rated ripple
(Arms)
1.40 1.50 1.50 1.65 1.65 1.95 1.95 1.95 1.95 2.25 2.25 2.45 2.45 2.45 2.45 2.45 2.65 2.65 2.65 2.65 2.65 3.00 3.00 3.35 3.35 3.35 3.75 3.75 4.20 4.20 4.60
tan δ
0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.52
Cap. (µF) 1800 2200 2700 3300 3900 4700
.