Document
ALUMINUM ELECTROLYTIC CAPACITORS
PS Miniature Sized, Low Impedance, For Switching Power Supplies series
Wide temperature range type, miniature sized. Compliant to the RoHS directive (2002/95/EC).
PJ
Smaller
(Through 100V only)
PS
Long Life TS
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
Performance Characteristics – 55 to +105˚C (6.3 to 100V), – 40 to +105˚C (160 to 400V), – 25 to +105˚C (450V) 6.3 to 450V 0.47 to 15000µF ± 20% at 120Hz, 20˚C
Leakage Current
Rated voltage (V) Leakage current
6.3 to 100
After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA) , whichever is greater.
160 to 450 CV <= 1000 : I= 0.1CV+40 (µA)max. (1 minute's) CV > 1000 : I= 0.04CV+100 (µA)max. (1 minute's)
Tangent of loss angle (tan δ)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF
Measurement frequency : 120Hz, Temperature : 20˚C
Rated voltage (V) 6.3 10 16 25 35 50 63 100 160 to 250 315 · 350 400 · 450
tan δ (MAX.) 0.24
0.20
0.16
0.14
0.12
0.10
0.09
0.08
0.15
0.20
0.25
Stability at Low Temperature
Rated voltage (V)
Impedance ratio (MAX.)
Z– 25˚C / Z+20˚C Z– 40˚C / Z+20˚C Z– 55˚C / Z+20˚C
6.3 · 10 — — 5
16 · 25 — — 4
35 · 50 — — 3
63 · 100 160 · 200
23 34 ——
Measurement frequency : 120Hz
250 315 · 350 400
450
3 4 6 15
6 8 10 —
————
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple
current is applied for 3000 hours (2000 hours for φD= 5 to 10) at 105˚C, the peak voltage shall not exceed the rated voltage.
Capacitance change Within ±20% of the initial capacitance value
tan δ
200% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Type numbering system (Example : 25V 470µF)
Sleeve (P.E.T.)
φd
1 2 3 4 5 6 7 8 9 10 11 12
UPS 1 E 4 7 1 MPD
φD+ MAX. P±0.5
Pressure relief vent
(φ6.3up)
L+ MAX.
(L < 20) 1.5 (L 20) 2.0
φD P φd
15MIN
5 6.3 2.0 2.5 0.5 0.5 0.5 0.5
4MIN
8 10 12.5 16 3.5 5.0 5.0 7.5 0.6 0.6 0.6 0.8 0.5 0.5 0.5 0.5
(mm) 18 20 22 25 7.5 10.0 10.0 12.5 0.8 1.0 1.0 1.0 0.5 0.5 1.0 1.0
• Please refer to page 20 about the end seal configulation.
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
5 DD
6.3 ED
8 · 10
PD
12.5 to 18
HD
20 to 25
RD
Size code Configuration
Capacitance tolerance (±20%) Rated capacitance (470µF) Rated voltage (25V) Series name Type
Frequency coefficient of rated ripple current
V 6.3 to 100
Cap.(µF)
Frequency
0.47 to 4700
100 to 220.
330 to 680.
.1000 to 15000
50Hz — 0.30 0.
Similar Datasheet