Document
ALUMINUM ELECTROLYTIC CAPACITORS
RY 12.5mmL Wide Temperature Range series
12.5mmL height. Compliant to the RoHS directive (2002/95/EC).
RY
High Te m p e r a t u re
RU
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
Performance Characteristics – 55 to +105°C (6.3 to 100V), – 40 to +105°C (160 to 400V), – 25 to +105°C (450V) 6.3 to 450V 6.8 to 4700µF ± 20% at 120Hz, 20°C
Leakage Current
Rated voltage (V)
6.3 to 100 After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or4 (µA), whichever is greater.
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Tangent of loss angle (tan δ)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V)
6.3
10
16
25
35
tan δ (MAX.)
0.28
0.24
0.20
0.16
0.14
Rated voltage (V)
6.3 10 16 25
Stability at Low Temperature
Impedance ratio Z– 25˚C / Z+20˚C
5
4
3
2
ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C 10
8
6
4
160 to 450
After 1 minute's application of rated voltage,
I = 0.04CV+100 (µA) or less
Measurement frequency : 120Hz, Temperature : 20°C
50 63 100 160 to 350 400 to 450
0.12
0.10
0.08
0.20
0.25
Measurement frequency : 120Hz
35 to 50 63 to 100 160 to 200 250 to 350 400
450
2 2 3 4 6 15
3 3 4 8 10
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
φD+0.5 MAX P±0.5
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure relief vent
L+ MAX
15MIN
4MIN
(φ D < 20) 1.5 (φ D 20) 2.0
φ D 12.5 16
P 5.0 7.5
φ d 0.6 0.8
(mm) 18 20 22 25 7.5 10.0 10.0 12.5 0.8 1.0 1.0 1.0
• Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 10V 2200µF)
1 2 3 4 5 6 7 8 9 10 11
URY 1 A 2 2 2 MHD
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
12.5 to 18
HD
20 to 25
RD
Configuration Capacitance tolerance (±20%)
Rated capacitance (2200µF) Rated voltage (10V) Series name Type
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
RY series
Dimensions
Cap.(µF)
330 470 680 1000 2200 3300 4700
V
Code 331 471 681 102 222 332 472
6.3 0J
12.5 × 12.5 18 × 12.5 25 × 12.5
580 730 1200
10 1A
18 × 12.5 22 × 12.5
16 25 1C 1E
820 1030
12.5 × 12.5 25 × 12.5
520 1000
12.5 × 12.5 18 × 12.5 25 × 12.5
35 1V
12.5 × 12.5 500 18 × 12.5 770 22 × 12.5 1170
50
1H 12.5 × 12.5 420 20 × 12.5 610 25 × 12.5 810
450 540 700
Case size Rated φ D × L (mm) ripple
Cap.(µF)
10 22 33 47 68 100 220 330 470
V
Code 100 220 330 470 680 101 221 331 471
63 1J
12.5 × 12.5 18 × 12.5 22 × 12.5
100 2A
12.5 × 12.5 400 22 × 12.5 550 610
160 2C
12.5 × 12.5 16 × 12.5 20 × 12.5
230 25 × 12.5 400
200 2D
12.5 × 12.5 130 16 × 12.5 210 18 × 12.5 280 25 × 12.5 360
110 170 230 310
250 2E
16 × 12.5 18 × 12.5 22 × 12.5
315
2F 12.5 × 12.5 130 16 × 12.5 170 20 × 12.5 190 25 × 12.5
70 85 120 160
Cap.(µF)
6.8 10 22 33
V
Code 6R8 100 220 330
350 2V
16 × 12.5 18 × 12.5 25 × 12.5
400 450
2G 2W
12.5 × 12.5
38
75 16 × 12.5
65 16 × 12.5 47
90 20 × 12.5 150 25 × 12.5 85
140 25 × 12.5 200
Rated ripple current (mArms) at 105°C 120Hz
Frequency coefficient of rated ripple current
V
6.3 to 100 160 to 450
Cap.(µF)
Frequency
100 to 680
1000 to 4700
6.8 to 100
50Hz 0.80 0.85 0.80
120Hz 1.00 1.00 1.00
300Hz 1.23 1.10 1.25
1 kHz 1.34 1.13 1.40
10 kHz or more 1.50 1.15 1.60
CAT.8100Z
.