ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
SW 7mmL, For Audio Equipment series
Acoustic series, with 7mm height. Compliant to the...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
SW 7mmL, For Audio Equipment series
Acoustic series, with 7mm height. Compliant to the RoHS directive (2002/95/EC).
SW
Smaller
MW
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 40 to +85˚C
6.3 to 50V
0.1 to 220µF
±20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater.
Rated voltage (V) tan δ (MAX.)
6.3 0.24
10 0.20
16 0.16
Measurement frequency : 120Hz, Temperature : 20°C
25 35 50
0.14
0.12
0.10
Measurement frequency : 120Hz
Rated voltage (V)
6.3 10 16 25 35 50
Impedance ratio Z– 25˚C / Z + 20˚C
4
3
2
2
2
2
ZT / Z20 (MAX.) Z– 40˚C / Z + 20˚C
8
6
4
4
3
3
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with black ...
Similar Datasheet