Document
ALUMINUM ELECTROLYTIC CAPACITORS
TM Timer Circuit Use series
Ideally suited for timer circuits. Excellent leakage current stability, even subjected to load or no load at high temperature for a long time. Compliant to the RoHS directive (2002/95/EC).
KL High Stability
TM
Specifications
Item
Performance Characteristics
Category Temperature Range
– 40 to +85°C
Rated Voltage Range
10 to 50V
Rated Capacitance Range 1 to 470µF
Capacitance Tolerance
± 20% (M) (±10% (K) semi-standard) at 120Hz, 20°C
Leakage Current Tangent of loss angle (tan δ)
After 2 minutes' application of rated voltage, leakage current is 0.001CV+1 (µA) or less.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V) tan δ (MAX.)
10 0.17
16 0.13
25 0.10
50 0.08
Stability at Low Temperature
Rated voltage (V)
Impedance ratio Z– 25°C / Z+20°C ZT / Z20 (MAX.) Z– 40°C / Z+20°C
10 2 4
Measurement frequency : 120Hz 16 25 50 2 1.5 1.5 322
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±10% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 51014 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
φD+0.5 MAX. P±0.5
Pressure relief vent
L+1MAX.
(mm) φD 6.3 8 10 12.5 16 P 2.5 3.5 5.0 5.0 7.5 15MIN 4MIN φd 0.5 0.6 0.6 0.6 0.8
• Please refer to page 20 about the end seal configulation.
Dimensions
Cap. (µF)
V Code
1 010
2.2 2R2
3.3 3R3
4.7 4R7
10 100
22 220
33 330
47 470
100 101
220 221
330 331
470 471
10 1A
6.3 × 11 8 × 11.5 8 × 11.5
10 × 16 10 × 20 12.5 × 25 12.5 × 25
16 1C
6.3 × 11 8 × 11.5
10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 25
25 1E
6.3 × 11 6.3 × 11
8 × 11.5 10 × 12.5 10 × 16 10 × 16 12.5 × 20 16 × 25 16 × 25 16 × 31.5
φ D × L (mm) 50
1H 6.3 × 11 6.3 × 11 6.3 × 11
8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 12.5 × 25 16 × 31.5
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Type numbering system (Example : 10V 33µF)
1 2 3 4 5 6 7 8 9 10 11
UTM 1 A 3 3 0 M PD
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
6.3 ED
8 · 10
PD
12.5 · 16
HD
Configuration Capacitance tolerance
(M : ±20%, K : ±10%) Rated capacitance (33µF)
Rated voltage (10V)
Series name
Type
CAT.8100Z
.