ALUMINUM ELECTROLYTIC CAPACITORS
ALUMINUM ELECTROLYTIC CAPACITORS
TM Timer Circuit Use series
Ideally suited for timer circuits. Excellent leakage curren...
Description
ALUMINUM ELECTROLYTIC CAPACITORS
TM Timer Circuit Use series
Ideally suited for timer circuits. Excellent leakage current stability, even subjected to load or no load at high temperature for a long time. Compliant to the RoHS directive (2002/95/EC).
KL High Stability
TM
Specifications
Item
Performance Characteristics
Category Temperature Range
– 40 to +85°C
Rated Voltage Range
10 to 50V
Rated Capacitance Range 1 to 470µF
Capacitance Tolerance
± 20% (M) (±10% (K) semi-standard) at 120Hz, 20°C
Leakage Current Tangent of loss angle (tan δ)
After 2 minutes' application of rated voltage, leakage current is 0.001CV+1 (µA) or less.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V) tan δ (MAX.)
10 0.17
16 0.13
25 0.10
50 0.08
Stability at Low Temperature
Rated voltage (V)
Impedance ratio Z– 25°C / Z+20°C ZT / Z20 (MAX.) Z– 40°C / Z+20°C
10 2 4
Measurement frequency : 120Hz 16 25 50 2 1.5 1.5 322
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±10% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 51014 clause 4.1 at 20°C, they shall meet the specified values for the en...
Similar Datasheet