DatasheetsPDF.com

SM4227 Dataheets PDF



Part Number SM4227
Manufacturers CUSTOM POWER DESIGN
Logo CUSTOM POWER DESIGN
Description 440 WATT BATTERY CONVERTERS
Datasheet SM4227 DatasheetSM4227 Datasheet (PDF)

______________________________________________________________________________________________________________________________________________________________ CUSTOM POWER DESIGN ELECTRONICS CONSULTANTS PROVIDING CUSTOM DESIGN, DEVELOPMENT, TEST & SUPPORT ______________________________________________________________________________________________________________________________________________________________ ______T_e_l_:_+__4__4__(0__)_1_1_8__9__3_0__2_2__9_9______________________________.

  SM4227   SM4227


Document
______________________________________________________________________________________________________________________________________________________________ CUSTOM POWER DESIGN ELECTRONICS CONSULTANTS PROVIDING CUSTOM DESIGN, DEVELOPMENT, TEST & SUPPORT ______________________________________________________________________________________________________________________________________________________________ ______T_e_l_:_+__4__4__(0__)_1_1_8__9__3_0__2_2__9_9______________________________A___D_I_V__IS__I_O_N___O__F__S_M__E__T__L__T_D_____________________________________F_a__x_:_+__4_4__(_0_)_1_1__8__9_3_0__2__2_0_6_____ www.custompsudesign.com Unit 19, The Markham Centre, Station Road, Theale, Berks. RG7 4PE. [email protected] 440 WATT BATTERY CONVERTERS OUTPUT 12V INPUT 24V INPUT 36V INPUT 48V INPUT 13.8V at 32A (12V) SM3707 SM3703 SM 4220 SM4225 27.6V at 16A (24V) SM3702 SM3706 SM4221 SM4226 41.4V at 10.7A (36V) SM3708 SM3709 SM4228 SM4229 55.2V at 8A (48V) SM3704 SM3705 SM4222 SM4227 ___________________________________________________________________________________________________________________________________________________________________________________ CAUTION: This adaptor is supplied on the basis of the user determining the suitability for the purpose for which it is to be used. Do not use in a moving vehicle without the consent of the vehicle manufacturer. Do not use for aviation or marine applications without our written agreement. Do not use for life dependent applications. The negative input lead is connected to case unless specified as isolated at time of purchase. SPECIFICATION: • VERY HIGH CONVERSION EFFICIENCY. • HIGH OUTPUT POWER IN COMPACT SIZE. • CHARGE ANOTHER BATTERY AT 12, 24, 36 OR 48V. • USE 12V OR 24V OR 36V OR 48V EQUIPMENT. • REMOTE ON / OFF CONTROL. • LOW BATTERY ALARM WITH AUTO SHUT-OFF . GENERAL DESCRIPTION: A rugged converter, generating 13.8V or 27.6V or 41.1V or 55.2V DC (lead acid float voltages), capable of powering most battery equipment when supplied from 12, 24, 36 or 48V batteries with up to 440 watts of continuous power. The output has a constant current characteristic so that lead acid batteries may be charged to provide a dual voltage system. The unit incorporates an electronic relay to turn it on/off remotely, driven by a control input, which may be supplied from any low current switch. The input and output are ohmically isolated, making installation very simple. Input can be isolated from chassis by up to 100V. The unit is packaged in a powder coated folded metal box. Input wires enter on one side face, and an outlet terminal block is mounted on the top face. Flanges are provided for mounting at each end. BATTERY INPUT Nominal Voltage: Input Voltage Range: Current, No Load: Efficiency (approximate): Low Battery Alarm: Battery Low Latch Off: Battery by Model. 12V or 24V or 36V or 48V Nominal – 11.7% to +16.7% 0.5A, 0.4A, 0.3A and 0.25A. 85% c Nominal – 12.5% c Nominal – 20% FLOAT OUTPUT Nominal Voltage: Output Voltage ± 0.15%: Current Limit ± 5%: Power, Nominal: 12V. 24V. 36V. 48V. 13.8V. 27.6V. 41.4V. 55.2V 33A. 17A. 11.4A. 8.5A 440 Watts. GENERAL Protection: Size: Weight: Storage Temp Range: Operating Temp Range: Over-current and short circuit output limit plus input fusing. 247mm x 103mm x 63mm. 1200 grams. -40 to +70C. -40 to +40C. Manufacturer Made in UK. ___________________________________________________________________________________________________________________________________________________________________________________ • SMET Ltd. manufactures a range of Battery to AC Mains Inverters, with quasi- sinewave output. Output power ranges from 120W to 2.7KW. • We offer a custom design service covering DC-DC and DC-AC Power Units. Call the Sales Office for details. We reserve the right to change this specification without notice. Document 3702-993 ___________________________________________________________________________________________________________________________________________ SMET Limited. Registered in England & Wales, Number 6760677. Registered .Office: Bell House, Ashford Hill Road, Ashford Hill, Berks. RG19 8BB. VAT No. (GB) 944 0645 24 .


SM4229 SM4227 MGA-655T6


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)