Document
ALUMINUM ELECTROLYTIC CAPACITORS
VP Bi-Polarized series
Standard bi-polarized series for entertainment electronics. Compliant to the RoHS directive (2002/95/EC).
EP
Wide Te m p e r a t u re
VP
Specifications
Item
Performance Characteristics
Category Temperature Range
– 40 to +85°C
Rated Voltage Range
6.3 to 100V
Rated Capacitance Range 0.47 to 6800µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 5 minutes' application of rated voltage, leakage current is not more than 0.03CV or 3 (µA), whichever is greater.
Tangent of loss angle (tan δ)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V) 6.3 10 16 25 35 50 63 100
tan δ (MAX.)
0.26
0.24
0.22
0.20
0.16
0.14
0.12
0.10
Measurement frequency : 120Hz
Rated voltage (V)
6.3 10 16 25 35 50 63 100
Stability at Low Temperature Impedance ratio
Z– 25°C / Z+20°C
4
3
2
2
2
2
2
2
ZT / Z20 (MAX.) Z– 40°C / Z+20°C
10
8
6
5
4
4
3
3
Endurance
Shelf Life Marking
The specifications listed at right shall be met when
the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C with the polarity inverted every 250 hours.
Capacitance change tan δ Leakage current
Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
φD+0.5 MAX P±0.5
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure relief vent
(φ6.3up)
L+ MAX
15MIN
4MIN
(L < 20) 1.5 (L >= 20) 2.0
(mm) φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
• Please refer to page 20 about the end seal configulation.
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Type numbering system (Example : 10V 47µF)
1 2 3 4 5 6 7 8 9 10 11
UVP 1 A 4 7 0 MDD
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
5 DD
6.3 ED
8 · 10
PD
12.5 to 18
HD
Configuration Capacitance tolerance (± 20%)
Rated capacitance (47µF) Rated voltage (10V) Series name Type
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
VP series
Dimensions
V 6.3 10 16
25 35
50 63 100
Cap. (µF)
Code
0J
1A 1C 1E 1V
1H
1J
2A
0.47 R47
5 × 11
11
5 × 11 14
1 010
5 × 11
17
5 × 11 21
2.2 2R2
5 × 11 25
6.3 × 11 34
3.3 3R3
5 × 11 27 5 × 11 28 6.3 × 11 39
4.7 4R7
5 × 11
34 5 × 11
34 6.3 × 11 34 6.3 × 11 47
10 100
5 × 11
42 5 × 11
42 5 × 11 43 6.3 × 11 52 6.3 × 11 57 8 × 11.5 71
22 220
5 × 11
57 5 × 11
57 6.3 × 11
65 6.3 × 11 73 8 × 11.5 89 8 × 11.5 95 10 × 16 135
33 330 5 × 11 64 5 × 11 64 5 × 11 70 6.3 × 11 80 8 × 11.5 100 8 × 11.5 105 10 × 12.5 135 12.5 × 20 220
47 470 5 × 11 76 5 × 11 76 6.3 × 11 95 6.3 × 11 95 8 × 11.5 120 10 × 12.5 150 10 × 16 180 12.5 × 20 240
100 101 6.3 × 11 125 6.3 × 11 125 8 × 11.5 160 8 × 11.5 160 10 × 16 230 10 × 20 265 12.5 × 20 320 16 × 25 425
220 221 8 × 11.5 215 8 × 11.5 215 10 × 12.5 275 10 × 16 305 12.5 × 20 410 12.5 × 25 480 16 × 25 575 18 × 35.5 720
330 331 8 × 11.5 265 10 × 16 345 10 × 16 375 12.5 × 20 450 12.5 × 20 505 16 × 25 650 16 × 31.5 655
470 471 10 × 12.5 370 10 × 16 410 10 × 20 485 12.5 × 20 540 12.5 × 25 655 16 × 31.5 835 18 × 35.5 965
1000
102 10 × 20 650 12.5 × 20 720 12.5 × 25 855 16 × 25 950 16 × 31.5 1140
2200
222 12.5 × 25 1160 16 × 25 1280 16 × 31.5 1510 18 × 35.5 1620
3300
332 16 × 25 1570 16 × 31.5 1690 18 × 35.5 1980
4700 6800
472 16 × 31.5 2020 18 × 35.5 2160 682 18 × 35.5 2600
Case size Rated φ D × L (mm) ripple
Rated ripple current (mArms) at 85°C 120Hz
Frequency coefficient of rated ripple current
Cap.(µF)
Frequency
0.47 to 47
0100 to 4700
1000 to 6800
50 Hz 0.75 0.80 0.85
120 Hz 1.00 1.00 1.00
300 Hz 1.35 1.23 1.10
1 kHz 1.57 1.34 1.13
10 kHz or more 2.00 1.50 1.15
CAT.8100Z
.