Document
ALUMINUM ELECTROLYTIC CAPACITORS
VR Miniature Sized series
VZ
One rank smaller case sizes than VX series. Compliant to the RoHS directive (2002/95/EC).
High Te m p e r a t u re
VR
Smaller
VK
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
Performance Characteristics – 40 to +85˚C (6.3V to 400V), – 25 to +85˚C (450V) 6.3 to 450V 0.1 to 33000µF ± 20% at 120Hz, 20˚C
Leakage Current
Rated voltage (V)
6.3 to 100V
After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater.
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Tangent of loss angle (tan δ)
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V) 6.3 10 16 25 35
tan δ (MAX.)
0.28
0.24
0.20
0.16
0.14
Rated voltage (V)
6.3 10 16 25 35
Stability at Low Temperature Impedance ratio Z– 25˚C / Z+20˚C 5 4 3 2 2
ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C 12 10
8
5
4
160 to 450V After 1 minute's application of rated voltage, CV <= 1000 :1= 0.1CV+40µA or less
After 1 minute's application of rated voltage, CV > 1000 :1= 0.04CV+100 (µA) or less
Measurement frequency : 120Hz, Temperature : 20˚C
50 63 100 160 to 315 350 to 450
0.12
0.10
0.08
0.20
0.25
Measurement frequency : 120Hz
50 63 100 160 to 200 250 to 350 400 450
222
3
4 6 15
333
4
8 10
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
φD+ MAX P±0.5
Pressure relief vent (φ6.3up)
L+ MAX
15MIN
4MIN
(mm) φD 4 5 6.3 8 10 12.5 16 18 20 22 25 P 1.5 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0 12.5 φd 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0
(L 20) 1.5 (L 20) 2.0
• Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 10V 330µF)
1 2 3 4 5 6 7 8 9 10 11 12
UVR 1 A 3 3 1 MED
Size code Configuration Capacitance tolerance (±20%) Rated capacitance (330µF) Rated voltage (10V)
Series name Type
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
4 DD6
5 6.3 8 · 10 12.5 to 18 20 to 25
DD ED PD HD RD
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC C.