16TTS.. High Voltage Series
Vishay High Power Products
Phase Control SCR, 10 A
2 (A)
TO-220AB
PRODUCT SUMMARY
VT at 10 A ITSM VRRM
1 (K) (G) 3
< 1.4 V 200 A 800/1200 V
DESCRIPTION/FEATURES
The 16TTS.. High Voltage Series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125 °C junction temperature.
Typical applications are in input rectification (soft start) and these products are designed to be used with Vishay HPP input diodes, switches and output rectifiers which are available in identical package outlines.
This product has been designed and qualified for industrial level.
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS
SINGLE-PHASE BRIDGE
Capacitive input filter TA = 55 °C, TJ = 125 °C, common heatsink of 1 °C/W
13.5
THREE-PHASE BRIDGE 17
UNITS A
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
IT(AV) IRMS VDRM/VRRM ITSM VT dV/dt
Sinusoidal waveform Range (1) 10 A, TJ = 25 °C
dI/dt
TJ Range
Note (1) For higher voltage up to 1600 V contact factory
VOLTAGE RATINGS
PART NUMBER
16TTS08 16TTS12
VRRM, MAXIMUM PEAK REVERSE VOLTAGE
V
800
1200
VALUES 10 16
800/1200 200 1.4 500 150
- 40 to 125
VDRM, MAXIMUM PEAK DIRECT VOLTAGE V 800 1200
UNITS A V A V
V/µs A/µs °C
IRRM/IDRM AT 125 °C
mA
10
Document Number: 93696 Revision: 16-Sep-08
For technical questions, contact:
[email protected]
www.vishay.com 1
16TTS.. High Voltage Series
Vishay High Power Products Phase Control SCR, 10 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average on-state current Maximum RMS on-state current
Maximum peak, one-cycle, non-repetitive surge current
IT(AV) IRMS
ITSM
Maximum I2t for fusing
I2t
Maximum I2√t for fusing Maximum on-state voltage drop On-state slope resistance Threshold voltage
Maximum reverse and direct leakage current
I2√t VTM
rt VT(TO)
IRM/IDM
Holding current
Maximum latching current Maximum rate of rise of off-state voltage Maximum rate of rise of turned-on current
IH
IL dV/dt dI/dt
TEST CONDITIONS TC = 98 °C, 180° conduction, half sine wave
10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied t = 0.1 to 10 ms, no voltage reapplied 10 A, TJ = 25 °C
TJ = 125 °C
TJ = 25 °C TJ = 125 °C
VR = Rated VRRM/VDRM
Anode supply = 6 V, resistive load, initial IT = 1 A 16TTS08, 16TTS12
Anode supply = 6 V, resistive load
VALUES TYP. MAX.
10 16 170 200 144 200 2000 1.4 24.0 1.1 0.5 10
- 100
UNITS
A
A2s A2√s
V mΩ V
mA
200 500 V/µs 150 A/µs
TRIGGERING
PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak negative gate voltage
SYMBOL PGM PG(AV) + IGM - VGM
Maximum required DC gate current to trigger
IGT
Maximum required DC gate voltage to trigger
Maximum DC gate voltage not to trigger Maximum DC gate current not to trigger
VGT
VGD IGD
TEST CONDITIONS
Anode supply = 6 V, resistive load, TJ = - 65 °C Anode supply = 6 V, resistive load, TJ = 25 °C Anode supply = 6 V, resistive load, TJ = 125 °C Anode supply = 6 V, resistive load, TJ = - 65 °C Anode supply = 6 V, resistive load, TJ = 25 °C Anode supply = 6 V, resistive load, TJ = 125 °C TJ = 125 °C, VDRM = Rated value
VALUES 8.0 2.0 1.5 10 90 60 35 3.0 2.0 1.0 0.2 2.0
UNITS W A V mA
V
mA
SWITCHING
PARAMETER Typical turn-on time Typical reverse recovery time Typical turn-off time
SYMBOL tgt trr tq
TEST CONDITIONS TJ = 25 °C
TJ = 125 °C
VALUES 0.9 4 110
UNITS µs
www.vishay.com 2
For technical questions, contact:
[email protected]
Document Number: 93696 Revision: 16-Sep-08
16TTS.. High Voltage Series
Phase Control SCR, 10 A Vishay High Power Products
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum junction and storage temperature range
TJ, TStg
Maximum thermal resistance, junction to case
RthJC
DC operation
Maximum thermal resistance, junction to ambient
RthJA
Typical thermal resistance, case to heatsink
RthCS
Mounting surface, smooth and greased
Approximate weight
Mounting torque
minimum maximum
Marking device
Case style TO-220AB
VALUES - 40 to 125
UNITS °C
1.3
62 °C/W
0.5
2g
0.07 oz.
6 (5) 12 (10)
kgf · cm (lbf · in)
16TTS08
16TTS12
Document Number: 93696 Revision: 16-Sep-08
For technical questions, contact:
[email protected]
www.vishay.com 3
16TTS.. High Voltage Series
Vishay High Power Products Phase Control SCR, 10 A
Maximum Allowable Case Temperature (°C)
Maximum Allowable Case Temperature (°C)
125 16TTS.. Series
120 R thJC (DC) = 1.3 °C/ W
115 Conduction Angle
110
105
100
95
90 0
30° 60° 90° 120° 180°
2 4 6 8 10 12
Average On-state Current (A) Fig. 1 - Current Rating Characteristics
125 16TTS.. Series
120 R thJC(DC) = 1.3 °C/ W
115 Conduction Period
110
105
100 30° 60° 90°
95 120° 180° DC
90 0 2 4 6 8 10 12 14 16
Average On-state Curr.