Document
ALUMINUM ELECTROLYTIC CAPACITORS
GY Snap-in Terminal Type, 105°C Long Life Assurance series
Long life assurance series withstanding 5000 hours application of ripple current at 105°C. Suited for use in industrial power supplies applications where high reliability and dependable performance are the most important. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC).
G YGR Long Life
Long Life GU
Smaller
Specifications
GX
Item
Performance Characteristics
Category Temperature Range
– 40 to +105°C
Rated Voltage Range
16 to 100V
Rated Capacitance Range 560 to 47000µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current Tangent of loss angle (tan δ)
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage(V)
16
25
35
50
63 80 100
tan δ (MAX.)
0.50
0.40
0.35
0.30
0.25
0.20
Stability at Low Temperature
Measurement frequency : 120Hz
Rated voltage(V)
Impedance ratio
Z–25°C/ Z+20°C
16 to 100 4
ZT/Z20 (MAX.)
Z–40°C/ Z+20°C
20
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours at 105°C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
Within ±25% of the initial capacitance value 250% or less than the initial specified value Less than or equal to the initial specified value
Shelf Life Marking
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change tan δ Leakage current
Within ±15% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value
Drawing
Polarity bar Sleeve (P.E.T.)
L±2 Pressure relief vent
10±0.1
4.0±0.5
10
0.8
+0.2 -0.1
0.8 +-00..21
Type numbering system (Example : 100V 680µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
LGY 2 A 6 8 1 ME L Z 3 0
Configuration Capacitance tolerance (±20%) Rated capacitance (680 F)
Rated voltage (100V) Series name Type
Case height code Case dia. code
φD Code 22 Z 25 A 30 B 35 C
φD +1MAX. 4.0±0.5 2.5
2 - 2 φ ±0.1 (PC board hole dimensions)
+0.2
1.5 -0.1 (Terminal dimensions)
The other terminal is also available upon request. Please refer page 272 for schematic of dimensions.
Frequency coefficient of rated ripple current
Frequency (Hz) 50 60 120 300 1k 10k 50k or more
16 to 100V
0.88
0.90
1.00
1.07
1.15
1.15
1.15
Minimum order quantity : 50pcs. Dimension table in next page.
CAT.8100Z
ALUMINUM ELECTROLYTIC CAPACITORS
GYseries
Dimensions
Cap. (µF) 6800 8200 10000
12000
15000
18000
22000
27000
33000 39000 47000
Size
φD × L(mm)
22 × 25 22 × 30 22 × 30 25 × 25 22 × 35 25 × 30 30 × 25 22 × 4.