UHD0J331MHD

ALUMINUM ELECTROLYTIC CAPACITORS HD High Ripple Low Impedance series Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2002/95/EC). HC Low Impedance HD Smaller Specifications ltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Endurance Marking HV Performance Characteristics – 40 to +105˚C 6.3 to 50V 22 to 6800µF ± 20% at 120Hz, 20˚C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Rated voltage (V) tan δ (MAX.) 6.3 0.22 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 120Hz 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 6.3 10 16 25 35 50 120Hz Impedance ratio Z–25˚C / Z+20˚C 2 2 2 2 2 2 ZT / Z20 (MAX.) Z–40˚C / Z+20˚C 3 3 3 3 3 3 The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 5000 hours (2000 hours for φD=5 and 6.3, 3000 hours for φD=8, 4000 hours for φD=10), at 105˚C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ± 25% of the initial capacitance value 200% or less than the initial specified valu...