Document
ALUMINUM ELECTROLYTIC CAPACITORS
HZ Ultra Low Impedance, For PC motherboard series
Lower impedance than HN series. Compliant to the RoHS directive (2002/95/EC).
HZ
Low Impedance
HN
Specifications
ltem Performance Characteristics
Category Temperature
–25 to +105˚C
Rated Voltage Range
6.3 to 16V
Rated Capacitance Range 470 to 3300µF
Capacitance Tolerance
± 20% (120Hz, 20˚C)
Leakage Current
After 2 minutes' application of rated voltage, leakage current is less than 0.03CV
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF
Tangent of loss angle (tan δ)
Rated voltage (V)
6.3
10
16
tan δ (MAX.) Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z—25˚C / Z+20˚C
0.22 6.3
3
0.19 10
3
0.16 16
3
Endurance
The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied for 2000 hours at 105˚C, the peak voltage shall not exceed the rated voltage.
Capacitance change tan δ Leakage current
120Hz 20˚C
120Hz
Within ±30% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
Marking
Printed with gold color letter on black sleeve.
φD+0.5 MAX. P ± 0.5
Radial Lead Type
Sleeve (P.E.T.)
φd
L+1.5MAX. Pressure relief vent
15MIN
4MIN
(mm) φD 8 10 P 3.5 5.0 φd 0.6 0.6
Type numbering system (Example : 6.3V 1800µF)
1 2 3 4 5 6 7 8 9 10 11 12
UHZ 0 J 1 8 2 MPM
Size code Configuration Capacitance tolerance (± 20%) Rated capacitance (1800µF) Rated voltage (6.3V)
Series name Type
Configuration
φD
Pb-free leadwire Pb-free PET sleeve
8 ⋅ 10
PM
Standard Ratings
V (Code)
6.3 (0J)
10 (1A)
16 (1C)
Cap. (µF)
Code
Item
Case size φD × L (mm)
Impedance Rated ripple
(mΩ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
Case size φD × L (mm)
Impedance Rated ripple
(mΩ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
Case size φD × L (mm)
Impedance Rated ripple
(mΩ) MAX.
(mArms)
20˚C / 100kHz 105˚C / 100kHz
470 471
680 681
820 1000
821 102
8 × 15 10 × 12.5
14 12
1200
122
8 × 15
14
10 × 12.5
12
1500
152
8 × 20
9
10 × 16
10
1800
182
10 × 16 8 × 20
10 9
2200
222
10 × 16 10 × 20
10 7
2700
272
10 × 20
7
3300
332
10 × 25
6.5
2210
2280
2210 2280 2880 2960 2960 2880 2960 3770 3770 4690
10 × 12.5
10 × 12.5 10 × 12.5 10 × 16
8 × 20 10 × 16 10 × 16
8 × 20
10 × 20
10 × 25
12
12 12 10 9 10 10 9
7
6.5
2288
2280 2280 2960 2880 2960 2960 2880
3770
4140
10× 12.5 10× 12.5
8× 20 10× 16 10× 16 10× 16
8× 20 10× 20 10× 20
10× 20
10× 25
12 12 9 10 10 10 9 7 7
7
6.5
2280 2280 2880 2960 2960 2960 2880 3770 3770
3770
4140
Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity.
: In this case, n will be put at 12th digit of type numbering system. : In this case, c will be put at 12th digit of type numbering system. : In this case, . will be put at 12th digit of type numbering system.
CAT.8100Z
.